Cleaning And Maintenance - Wmf Lineo Gebrauchsanweisung

Start-up
Pleaseclean all parts as described in the 'cleaning and care' section before allow
ing them to come into contact with food.
Placethe container(2) on the drive unit (5) and Ockin placebytwisting in a
clockwise direction.Clickthe container(2) into place.
• Remove the protectivecoverfrom the stainless steel blade(3) and •nsertthe
steel blade (3) into the slot at the bottom of the container (2)
Caution: The blade is sharp. For this reason, always replace the protective
cover when the blade is not
• Insert the food, seal the container (2) with the lid (1). Place the food in the
container (2) no higher than the MAX mark
Close the lid (1)by twisting in aclockwisedirection,the 'd (1) clicksin. Ensure
the lid is fitted correctly(seediagram)
After connecting the mains plug, select the desiredspeed setting on the speed
control (4).Now briefly press downthe impulsering on the lid (1)several
times(seediagram)until the desiredresultis achieved.
Alwayswait for the blade(3) to cometo a standstillbeforeremovingthe lid
Safety function
Themotor Ofthe multi-chopperwill only start whenthe container(2) and lid (1)
areattachedcorrectly.Donot removethe lid (1)whi e the deviceis operating
12
in use.

Cleaning and maintenance

Remove the mains plug after use.The drive unit (5) should never be placed
in water, only wiped down on the outside with a damp cloth. Do not use any
abrasive cleaning agents Make sure that you do not injure yourself on the sharp
blade(3) whi e cleaningit. Foodresiduecouldget into the bladeslot. Remove this
after every use.
dishwasher safe can
under running
Lid with impulse
ring (1)
Container (2)
Stainless steel
blade (3)
Drive unit (5)
wipe off with a
be rinsed
damp cloth
water
13