Cyrusher Path Benutzerhandbuch Seite 9

6.5 Drive mode setting
05P is the drive mode setting option, 00 represents power-
assisted drive only, 01 represents electric drive only, and 02
represents power-assisted electric coexistence.
Short press [ ], enter the state of changing parameters,
short press [ ]/[ ] for parameter selection, short press
[ ], save the parameter setting and return to the
personalized parameter setting item selection interface;
6.6 Power Start Strength Setting
06P is the booster start strength setting option, setting
range:00-05; 00 is the weakest, 05 is the strongest.
Short press [ ], enter the state of changing parameters,
short press [ ]/[ ] for parameter selection, short press
[ ], save the parameter setting and return to the
personalized parameter setting item selection interface;
Fig.
6.5
6.7 Controller Current Limit Setting
07P is the controller current limit setting option, the meter
controller current limit adjustable range is: 1~50A.
Short press [
short press [
[ ], save the parameter setting and return to the
personalized parameter setting item selection interface;
Fig.
6.6
], enter the state of changing parameters,
]/[ ] for parameter selection, short press
Fig.
6.7
08