Zeroing Single Mileage Operation; Warranty Information - Cyrusher Path Benutzerhandbuch

7.2 Zeroing Single Mileage Operation

EN
The meter can record single mileage and total mileage,
DE
single mileage will not be automatically cleared after the
FR
meter is turned off, if you want to clear single mileage, you
need to clear it manually. If you want to clear the single
ES
mileage, you need to clear it manually. The total mileage of
the meter does not support clearing.
The operation of zeroing single mileage is as follows:
Under the condition that the speed of the main interface is 0,
short press [
[ ] and [ ] at the same time for more than 2 seconds,
you can carry out a single mileage clearing, and the
interface display 000.0 blinks three times on behalf of the
clearing of the zero is successful.
11
] to switch to TRIP interface, press and hold
Fig. 7.2
Part8 Quality commitments and
warranty scope

1.Warranty information:

For the faults caused by the quality of the product
under normal use, the Company will be responsible
for providing limited warranty during the warranty
period.
The warranty period of the product is within 12 months
from delivery.
2.Non-warranty scope
The enclosure is opened
The connector is damaged
The enclosure is scratched or damaged after delivery
The outgoing line of the display is scratched or broken
Faults or damage caused by force majeure
fi res, earthquakes, etc, or natural disasters
)
lightning strikes, etc.
)
The warranty period has expired
such as
(
such as
(