Technical Data; Replacement Parts - Riester Ri-Focus Led Gebrauchsanweisung

2.3.10 Technical data

Description
Lamp for clar N vacuum 55 mm
Lamp for clar N LED 55 mm
LED for ri-focus® LED
2.3.11 Exchanging the headband padding
The foam padding can be simply removed from the Velcro and replaced by new foam padding.
2.3.12 Instruction for care
General information
The goal of cleaning and disinfection of medical products is the protection of patients, users and third persons and conserving
the value of the medical products. On account of the product design and the used material, no defined limit of maximum processing
cycles can be fixed. The lifetime of the medical products depends on their function and on a appropriate treatment of
the devices. Before returning faulty products for repair they must have gone through the described reprocessing process.
Cleaning and disinfection
Head mirrors and headlights can be cleaned outside with a humid cloth until optical cleanness is given.
Wipe disinfection according to the regulations given by the disinfectant manufacturer. Only disinfectants with approved
efficiency and in accordance with the national standards can be used.
After disinfection the device must be cleaned with a humid cloth to remove all possible deposits of disinfectants.
Caution!
Never place the head mirror and headlights in liquid!
The items are not permitted for machine cleaning and sterilisation as they will damaged!

3. Replacement parts

LED illumination
Art. No. 11302
Lamps 6 V for clar N LED
Standard illumination:
Art. No. 11301 Pack of 6 lamps à 6 V for
Voltage Amperage
6 V 6 V 0.4 A
6 V 0.35 A
0.525 A
clar N vacuum
Average service life
approx. 200 hours
approx. 15.000
hours approx.
50.000 hours
24