Motion Det - Samsung SCC-C4233 Bedienungsanleitung

MOTION DET

❚
[MOTION DET] menu is used to configure the motion detection related
settings. If you press the SETUP switch when [ON...] is selected in the
[MOTION DET] menu, the corresponding screen appears.
CAMERA.ID..
IRIS..
SHUTTER..
AGC..
WHITE.BAL..
FOCUS.MODE..
MOTION.DET..
DAY/NIGHT..
PRIVACY..
SPECIAL..
PRESET..
EXIT..
You cannot change the setting for type 2 because it is prefixed with the
full screen. In case of 1 and 3, you can set the motion detection area
on your own.
Those 3 types are like the following:
1. Window Type
The selected area is displayed with a box. The motion can be
detected for the area only. You can manually set the motion
detection area. You can use the Up/Down/Left/Right SETUP
switch to set the size. To move to [POSITION], press the SETUP
switch. After setting the position using the Up/Down/Left/Right
SETUP switch, press the SETUP switch to move to the upper
menu. To set the size and position for [AREA], select any of 0, 1,
2, and 3.
2
OFF
ALC...
OFF
HIGH
ATW2
AF
ON...
DAY...
OFF
...
...
QUIT
(MOTION.DET)
TYPE.
AREA.
DISPLAY.
SENSITIVITY.
RET
1
0*....1*....2*....3*
ON
L.�.�.�.I.�.�.�.H