Babboe Curve Bedienungsanleitung Seite 51

Parts needed:
- Sachet B (2x M8 bolts, 2x M8 lock nuts, 4x M8 washers)
The steering tube is mounted onto the front frame during this step. The steering
tube is already connected to the rear frame by means of the gear and brake cable.
E.
10.
through the hole with a hammer or the handle of a screwdriver.
!
Important! Adhere to the correct order for the nut, bolt and washers in order
to secure everything in the best possible way (see detail picture E).
Tools needed:
- Open-end spanner # 13
- Allen key # 5
51