Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
BABBOE CITY & BABBOE MINI
Preliminary remarks
There is no need to drill extra holes in the box in order to install the Maxi-Cosi carrier in the Babboe City and
Babboe Mini, since you will be using the existing holes in the box.
The Maxi-Cosi carrier consists of two parts:
• Part 1: the base at the bottom of the box
• Part 2: the carrier for the Maxi-Cosi
Tools required:
• Open-end/ring spanner size 10
• Phillips screwdriver
• From the supplied sachet you will need:
- The two long bolts
Montage
Step 1:
Preparations
Hold the nuts underneath the bottom panel in place using a ring spanner and unscrew the bolt with a
Philips screwdriver.
Babboe Mini: In order for the Maxi-Cosi to be used in the Babboe Mini, the bench needs to be removed
from the box.
Step 2:
Installing the base on the bottom
Use the two long bolts from the sachet to secure the base to the bottom panel. Place the base with the long strip on
the two spots where you just removed the bolts from. Then securely tighten the two nuts and bolts. Make sure the
latch mechanism is on the top side.
16
Step 3:
Installing the carrier onto the base
Place the carrier onto the base by 'hooking' it behind
the front metal strip. Then tilt the carrier downward
between the two rear strips. Now turn the latching
mechanism so the carrier is firmly secured to the base.
The carrier is now ready to use.
Step 4:
Placing the Maxi-Cosi in the carrier
In order to correctly place the Maxi-Cosi in the carrier,
the carrying handle should be in the upright position.
Secure the two rubber bands on both sides of the carrier,
with the closed side of the hook facing inwards.
Secure the hooks on the front of the carrier to the
lower "rods" (see A in the picture on the right).
You are now ready to take your baby in the Maxi-Cosi
carrier in your Babboe cargo bike. Wishing you lots of
cargo bike fun!
Carrying handle in
the upright position!
Secure the rubber bands on both sides. Closed side of the
hook facing inwards. Front hook attached to lower rod!
17
Werbung
Inhaltsverzeichnis
