Installation And Servicing; Preparing To Install The Device; Installation Rules - Thermor Riva 5 Installationsanleitung

Installation and Servicing

PRÉPARER L'INSTALLATION DE L'APPAREIL

Installation rules

-
This device has been designed for installation in a residential setting.
For any other scenario, please consult your dealer.
-
Installation must be carried out in accordance with good industry
practice, and with the standards in force in the country of installation
and electrical installations must comply with the requirements and
guidance of the IET wiring regulations BS7571.
-
In wet environments such as bathrooms and kitchens, the connection
box must be installed at least 25 cm from the floor and outside of
Area 2. The installation must be equipped with a 30 mA protective
residual current device.
- Installing a device at altitude causes an increase in the air
outlet temperature (10 °C per 1000 m change in altitude).
It is highly inadvisable to fit devices above an altitude of 1000 m (risk
of malfunction). The appliance is not for use above altitude of 2000
m. It is prohibited to fit a vertical device horizontally, and vice versa.".
- Keep the device out of the way of any air currents that might disrupt
its operation (e.g.: under a ventilation system, etc.).
- Do not install it directly under a power outlet.
≥ 250 mm
Maintain the minimum distances from
furniture when positioning the device.
Do not install any shelves above the
≥ 150 mm
device.
The power box at the bottom of
your device must be at least 5 mm
away from your wall to ensure good
ventilation.
To avoid all danger to very young
children, it is recommended that
this device be installed such that the
lowest heated bar is at least 600 mm
≥ 250 mm
above the ground.
≥ 200 mm
34 34