Instar IN-5905HD Kurzanleitung

Attach the wifi antenna to the
connector as shown above (User Manual Chapter 3
4
press the reset button
activate the cameras WPS service
Chapter 3 #9). Wait for max. 5min for the camera to
connect to your Wifi network. Ifyou pressit for IOS,the
camera will be reset to it's factory defaults!
7
Camera Name
Camera ID
Default Name
Default pass wold
The QR code contains all the necessary information to
add your camera. please be aware that the default
login credentials Will be used. If you want to change
the default password please check the Quick
Installation Guide. The password can only be changed
in the web user interface.
2
camera's antenna Plug in the power supply (UserManual Chapter
3 # 8) to start the camera.
5
NSTAR
3s
for 3 seconds to Start our Android or iPhone app Instar Vlsion.
Choose to add a new p2p camera and start the
(User Manual
QR code scanner. Your QR code is located
'able on the camera case (s. above).
8
The app will now connect to your camera's live
stream and you Will be able to activate the
audio stream (needs an external microphone)
and to take snapshots.
IN-5905HD
P2P - Plug & Play
If your router supports the WPS (Wireless
Protected Setup) function, please press the
WPS button on the router, which looks similar
to the examples above.
Nn IN-59asHD
Scan the code to add your IN-5905 as a new
p2p camera and confirm the settings. If you
on a already changed the camera's admin login,
please adjust this in the following dialogue as
well.
The wps / p2p method allows you to quickly
connect your camera and check the camera's
live
Installation
access additional
3
6
9
stream. Please refer to
Guide for instruction
camera features.
the Quick
on how to