Bedienung - Halemeier S-Mitter Basic Multiwhite2 Bedienungsanleitung

S-Mitter Basic MultiWhite²
1-Channel Zigbee Transmitter
en Technology in brief
Halemeier Zigbee controller for controlling lights.
Device support:
- Utilises the Zigbee 3.0 protocol
- Supports Zigbee TouchLink
- Compatible with Zigbee gateway universal products
Battery: CR3032/3 V

Bedienung

Red LED indicator
Dimming all channels
ON - OFF all channels
warm white
cold white
1 - 4 memory locations for
personal colour settings can
be programmed / overwritten
by holding down the desired
button for approx. 4 seconds.
Teaching/connection
Set receiver to learning mode:
Briefly press the programme button 4 times.
The learning mode is now active for 180 seconds and can
be repeated as often as desired without having to delete
existing connections.
A connected light flashes several times.
Hold the remote control max. 10 cm away from the receiver.
To activate the remote control from sleep mode, briefly press
the button once.
QR code for additional instructions, e.g.
for integration into your SmartHome
system (Hue, Echo Plus, etc.)
3
Information: Please read these instructions carefully before installation and
commissioning.
If you have purchased the receiver in a set with a transmitter, it is already
programmed. After installation and commissioning, you can use the functions
for setting the connected lighting system directly.
105
48
10,5
36.257.01 Wall bracket Smart Basic
magnetic (optionally available)
Halemeier GmbH - Lange Straße 51 - 49326 Melle Neuenkirchen -
cq
Combinable smart receivers:
31.118.01 Smart receiver
MultiWhite² 12 V DC/24 V DC
Battery: CR3032/3 V
4x
1x
QR code for the Halemeier YouTube channel with
instruction videos for integration into your
SmartHome system (Hue, Echo Plus, etc.)
www.halemeier.de
10 cm
25.825.09 09. 10. 2025