Installations - Smallrig Rc 100C Betriebsanweisungen

In the Box
RC 100C COB LED Video Light
mini Reflector

Installations

1. Installation and Removal for Mini-Mount Modifiers: Take mini reflector as an example.
Align the mini-mount reflector with the mini-mount port on the front cover of the light.
Rotate counter-clockwise to install. Push the Mini modifiers Release Button and rotate
the mini reflector clockwise to remove.
2. Mounting the Light to a Light Stand: First,
connect the light stand adaptor to the RC
100C using the 1/4" threaded hole on the
bottom. Then, install the light stand adaptor
onto the light stand and adjust the angle of
the RC 100C. Finally, tighten the tilt lock on
the light stand adaptor to secure it.
× 1 Operating Instruction
× 1
06
EN
× 1