Important Reminder - Smallrig Rc 100C Betriebsanweisungen

Important Reminder

Thank you for choosing SmallRig products.
1. Please read this operating instruction carefully before using this product.
2. Please pay attention to all warning prompts and follow all instructions operating instruction.
3. Children should only operate this equipment under adult supervision. Please do
not leave the gear unattended without continuous supervision.
4. After using the gear, the COB chip board, top, and bottom of the gear will become
extremely hot. Please avoid touching these areas until the gear has cooled down.
For your safety and well-being, do not block the cooling holes and avoid directly
exposing your eyes to the COB LED chip.
5. If you need to use a longer power cable, please make sure that the rated amp mark
on the power cable is larger or equal to the rated amp on the gear.
6. To avoid stumbling over the power cable or accidentally pulling it, which may cause
the gear to lose power, please properly secure the power cable after use. Also, be
cautious and make sure not to place the power cable near heat sources or interfaces.
7. Please do not operate the gear or power cable if they are damaged. In the event
that the gear or accessories are damaged or experiencing a fault, please seek
assistance from a qualified repairing engineer.
8. Please make sure that the gear has completely cooling down before storage. Place
it in the appropriate compartment in the storage box.
9. To ensure proper operation of the gear, it is recommended to store it in a cool,
dry, and clean environment. Do not store the gear near damp areas or in the vicinity
of liquids, flammable substances, or volatile solvents to avoid damaging the gear.
10. Working temperature: -10 to 45℃ (14 to 113℉).
11. Reference storage temperature / humidity: 20℃ ± 5℃ (59 - 77℉) / 60 ± 15%.
12. If you need to clean the surface of this gear, please use a dry, soft cloth for cleaning.
Before cleaning and performing maintenance, make sure to disconnect the power
adapter and body connection cable.
13. To reduce the risk of electric shock, it is strictly prohibited to immerse this gear
in water or any other liquids.
14. To reduce the risk of electric shock, it is strictly prohibited to dismantle this gear
without authorization. If the gear malfunctions and requires repairs, please
consult the relevant purchase channel and submit it to professional repair
personnel. Non-standard assembly and repairs may cause safety hazards.
Unauthorized dismantling is strictly prohibited and, once verified, SmallRig will
consider the warranty void.
15. Using non-SmallRig recommended accessories may cause hazards such as fire
or electric shock. Please refer to the accessories provided by SmallRig or use
certified accessories from qualified manufacturers based on the specifications
provided by SmallRig. If it is verified that the use of non-compliant accessories
leads to gear malfunction, SmallRig will consider the warranty void.
16. If any damage is found on the product, please stop using it immediately and
contact the after-sales service department for repair or replacement.
Attention:
(1) Do not touch the COB LED chip and front cover glass.
(2) To ensure the product operates at full power, it is recommended to use a V-mount
battery with an output power of over 120W.
02
EN