Product Overview - Smallrig Rc 100C Betriebsanweisungen

Product Overview

EN
2
3
1
ON / OFF Switch: After connecting to the power source, turn the switch to "ON"
and rotate the INT knob one round to power on the RC 100C; turn the switch to
"OFF" to shut down. The Bluetooth name suffix of the gear will be displayed at
the bottom of the white startup interface. The screen display will change as follows.
Mode / Preset Button: Click the "MODE" button to cycle through the color temperature
2
/ HSI / light effect / GEL / RGBCW modes.The screen display will changed as follows.
CCT
BP in
CCT INT
6500 85%
G/M -0.8
In CCT / HSI / FX / GEL / RGBCW mode, long-press the mode button 2s to store
【2.1】
the current parameters and goes into the PRESET mode.Rotate the INT knob to
select the presets and click to confirm.Long-press the button 2s again or select
the preset to exit. Up to four sets of preset parameters can be stored. The screen
display will change as follows.
1 6 7
HSI FX
BP in
INT 85%
HUE SAT
CCT
27 48%
6500
4
5
GEL
BP in
FX
INT
INT
100%
GEL 1/8 CTO
FRQ
LEE
10
03
BP in
CCT INT
6500 85%
G/M -0.8
RGBCW
BP in
R
0 INT
0%
G C
0
B W
ROSCO 0
BP in
100%
0
0