Fitting The Batteries; Battery Requirements - Fox Rx+ Sensor Bedienungsanleitung

ENGLISH
4

Fitting the Batteries

1. Using the supplied screwdriver unscrew the two battery cover
screws.
2. Pinch either side of the battery cover to grip and pull the cover
away from the case.
3. Take care removing the batteries. Insert new batteries and
ensure correct polarity.
4. For best weatherproofing, ensure battery cover has a good seal
by seating it in place applying firm pressure.
5. Re-fit cover and screws.

Battery Requirements

The RX+S requires 2 x LR6 AA 1.5V Alkaline batteries. The use of good
quality batteries is essential for maximum battery life.
To reduce the risk of battery leakage:
• DO NOT mix old and new batteries
• DO NOT mix different battery types
The use of rechargeable batteries is NOT recommended
•
If the RX+S will not be used for a long period please ensure the batteries
are removed.
DO NOT over tighten the
battery compartment
screws, excessive force will
damage the screw threads.