Heat up the device:
- Before first use, clean the grill plate and pans with mild dishwater and dry them thoroughly.
- Insert the power plug into a household socket, making sure that the on/off switch is in
the " " position.
- Heat the appliance for approximately 10 minutes without food. A slight odor and smoke
may be emitted. This is normal and harmless; the protective coating required for production
is evaporating. Ventilate the room thoroughly.
- Then rinse the grill plate and pans as described under "Cleaning and Care".
Mains connection:
- This appliance is equipped with a grounding cable and a grounding mains plug.
- The device may only be connected to a properly installed, grounded outlet (220-240V ~
50/60 Hz). Grounding reduces the risk of electric shock in the event of a short circuit.
- The socket should be freely accessible so that the power plug can be pulled out immediately
in the event of a fault.
- If the cable and/or plug are damaged, the device must not be used.
- The mains voltage must correspond to the voltage indicated on the device's rating plate.
- The device complies with the directives that are mandatory for CE marking.
Please note:
- The device is equipped with a short power cord to prevent tangling or tripping over the
cord.
- Long cables can become tripping hazards and dangerous for children, so they should be
avoided.
- It is recommended not to use this device with extension cords or multiple sockets. If this is
unavoidable, always ensure that the cable used is a 3-wire, earthed cable that complies with
the prescribed safety regulations and bears the necessary approval marks.
Grilling / preparing raclette:
- Cut the food (meat, fish, bacon, vegetables, boiled potatoes, cheese, etc.) into small pieces
and prepare them for cooking/grilling.
- Brush the grill plate and the pans with a little cooking oil or fat.
- Plug the power plug into a household socket.
- Turn the device on using the on/off switch (position "
the switch will illuminate.
- Heat the device for about 10 minutes until the grill plate is hot.
- Place the prepared food on or in the pans.
- If you want to stop the grilling process, switch the device off (switch to position " ") and
unplug the power cord.
Operation
"). The operating indicator light on
15