Factory Setting - Retevis Rb689 Bedienungsanleitung

Charging: Red light.
Full charge: Red light off.
18. Pairing your radio with the Bluetooth headset operation steps
1. Press the power on/off button for 5 seconds on your Bluetooth headset in power-off status, red blue lights flash
and go into pairing mode.
2. Press the PTT button and PF2 button to turn on your radio, blinking blue 4 times rapidly, 'beep, beep' and
prompt the channel number, the Bluetooth icon flashing and go into pairing mode.
3. Once the pairing is established, the Bluetooth headset blinks per 5 seconds, and the Bluetooth icon stops
flashing.
19. Wireless Copy
1. Open the Edit menu in the programming software-tick the wireless copy, and the factory default setting is
ticked; The same frequency on the Transmitter and Receiver first.
2. Press the PF2 button on the Receiver and turn on the radio, blue light flashes 4 times, 'beep, beep' and
prompts the channel number to enter the wireless copy receiving mode.
3. Press the PF1 button on Transmitter and turn on the radio, blue light flashes 4 times, 'beep, beep' and prompts
the channel number to enter the wireless copy transmitting mode.
4. Press the PTT button on Transmitter, red light when transmitting, and reboot to return to the wireless copy
mode.
5. Receiving the copy data on Receiver when blue light flashes, restored when completed.
▲: Support only the same radio solution.

Factory setting

CH NO. TX Frequency(MHz)
1 464.5500
2 467.9250
3 467.8500
4 467.8750
5 464.5500
6 467.9250
7 467.8500
8 467.8750
9 464.5500
10 467.9250
11 467.8500
12 467.8750
13 464.5500
14 467.9250
15 467.8500
16 467.8750
Code(Hz)
67.0
67.0
67.0
67.0
82.5
82.5
82.5
82.5
179.9
179.9
179.9
179.9
-
-
-
-
05
Power
High
High
High
High
High
High
High
High
High
High
High
High
High
High
High
High