JVD RB3409 Bedienungsanleitung Seite 74

 If the product is powered by batteries, press the "
 When the power supply of the product is inserted into the power supply adapter, the battery
will automatically disconnect the power supply, and the backlight will always be bright. Press the
"
"▲ button to adjust the brightness of the backlight, you can adjust the 5 state: 4 different
brightness backlight and close the backlight. When the backlight brightness is not at the
maximum brightness, press the "
seconds.
 The weather station can also set the backlight to automatically dim at night. Press and hold the
" " button for more than 2 seconds to enter the night mode setting. First, turn the night
function on or off. Now use "▲" and "
(OFF).
 Press " " button to confirm your setting, switch to the brightness setting of the backlight
change after entering the night. Now use "▲" and "
backlight change after entering the night
 Press " " button to confirm your setting, switch to the hour of enter night mode setting. Now
▼
use "▲" and " " buttons set the required hour
 Press " " button to confirm your setting, switch to the minute t of enter night mode setting.
▼
Now use "▲" and "
 Press " " button to confirm your setting, switch to the hour of exit night mode setting. Now
▼
use "▲" and " " buttons set the required hour
 Press " " button to confirm your setting, switch to the minute of exit night mode setting. Now
▼
use "▲" and " " buttons set the required minute
 Press " " button to confirm your setting and to end the setting procedure.
 During the time setting process, double-click the "
mode directly.
 When the night mode is on, the icon "
enter the night mode, the backlight will automatically switch to the set night mode brightness, and
when the time reaches the time to exit the night mode, the backlight will return to the original
brightness
 In night mode, the backlight can be switched to the highest brightness for 15 seconds by
pressing the "
F.Y.I.:
 During the reception of the time radio wave signal, the backlight will be automatically closed to
▼
" buttons set the required minute
" button
RB3409
" button. Backlight turns to highest brightness of 15
" buttons set the night function to activate (ON) or close
▼
" buttons set the brightness required for the
" will be displayed. When the time reaches the time to
74
" button. Backlight lit 15 seconds.
" press area to exit the setting