JVD RB3409 Bedienungsanleitung Seite 68

 Press "
" button to confirm your setting, switch to the time zone setting of the city. Use the
▼
"▲" and " " buttons to set the correct time zone.
 Press "
" button to confirm your setting, switch to the longitude setting of the city. Use the
▼
"▲" and " " buttons to set the correct longitude.
 Press " " button to confirm your setting, switch to the latitude setting of the city. Use the "▲"
▼
and " " buttons to set the correct latitude.
 Press "
" button to confirm your setting and to end the setting procedure.
 During the time setting process, double-click the "
mode directly.
 When you have set a custom city, a sequence number of 000 will appear in the city selection
sequence, which is the custom city sequence number.
 After selecting a city or setting a custom city, the sunrise time and sunset time are automatically
calculated according to the location, time zone and current time of the selected city, and
displayed in the corresponding area
Temperature & Humidity detection:
 Indoor temperature measuring range: -9.9°C (+14°F) ~ +50°C (+122°F), LL.L °C(°F) will
displayed if value lower than -9.9°C (+14°F), HH.H °C(°F) will displayed if value higher than
+50°C (+122°F).
 Outdoor temperature measuring range: 40°C (-40°F) ~ +70°C (+158°F), LL.L °C(°F) will
displayed if value lower than -40°C (-40°F), HH.H °C(°F) will displayed if value higher than +70°C
(+158°F).
 Indoor and outdoor humidity measuring range: 20%RH ~ 95%RH, 19%RH will displayed if
value lower than 20%RH, 96%RH will displayed if value higher than 95%RH.
Wireless sensor transmission:
 When the Weather Station successfully receives signals from the Wireless Sensor, the
temperature and humidity of the outdoor are displayed on the "OUTDOOR" column of the
weather station.
 The Weather station can connect up to 3 channel wireless sensor registration, the use of
multiple wireless sensor, the wireless sensor channel cannot choose the same channel at the
same time (a total of 1, 2, 3 channel can choose)
 Press the " " button can switch the display of different channels of outdoor temperature and
humidity, when displaying the symbol "
automatically switch a channel
 If the Weather Station failed to receive transmission from outdoor sensor ("--" display on the
RB3409
", will display the channel every 5 seconds
68
" press area to exit the setting