JVD RB3409 Bedienungsanleitung Seite 71

 Press and hold down the "
humidity alert setting, the first is the upper limit alert setting of the in temperature. Use the "▲"
▼
and " " buttons to set the upper limit alert value
 Press the " " button to confirm and switch to the next item, set the lower limit of the in
temperature alert, Use the "▲" and "
 Press the "
" button to confirm and switch to the next item, set the upper limit of the in
humidity alert, Use the "▲" and "
 Press the "
" button to confirm and switch to the next item, set the lower limit of the in
humidity alert, Use the "▲" and "
 Press the " " button to confirm and switch to the next item, set the upper limit of the out
temperature alert, Use the "▲" and "
 Press the " " button to confirm and switch to the next item, set the lower limit of the out
temperature alert, Use the "▲" and "
 Press the "
" button to confirm and switch to the next item, set the upper limit of the out
humidity alert, Use the "▲" and "
 Press the "
" button to confirm and switch to the next item, set the lower limit of the out
humidity alert, Use the "▲" and "
 Press " " button to confirm your settings and end the setup process.
 When setting the upper and lower limit alerts for temperature and humidity, Press the "
button to switch the alert settings for setting the upper and lower temperature and humidity limits
of different channels.
 During the setting process, Press and hold the "
exit the setting mode immediately
F.Y.I.:
 After 20 seconds without Pressing any button, the weather station switches automatically from
Set Mode to Normal Time Mode.
Temperature and humidity upper and lower limit and frost warning
 When the upper limit or lower limit alarm of the corresponding channel is turned on, and the
actual value of its temperature or humidity exceeds the set upper limit or lower limit limit, the
corresponding upper limit symbol "
corresponding display data will flash. At the same time, the product emits an alarm sound.
RB3409
" button for more than 2 seconds to enter the temperature and
▼
" buttons to set the lower limit alert value
▼
" buttons to set the upper limit alert value
▼
" buttons to set the lower limit alert value
▼
" buttons to set the upper limit alert value
▼
" buttons to set the lower limit alert value
▼
" buttons to set the upper limit alert value
▼
" buttons to set the lower limit alert value
"
or lower limit symbol "
71
" button for more than 1 second to
"
"
and the