Manual Time Setting - Jvd Rb3409 Bedienungsanleitung

F.Y.I.:
 The Weather Stations can receive up to 3 channels of wireless sensors.
 The conventional wireless sensor displayed by the weather station is channel 1. If the wireless
sensor is set to channel 2 or 3, you need to press the "
weather station to switch to channel 2 or 3, and then check whether the temperature and
humidity are correct to confirm whether the signal is successfully received.

Manual time setting:

 Press and hold down the "
settings, first set the temperature of the unit, now use "▲" and "
temperature to "°C" or "°F"
 Press " " to confirm your setting, switch to Pressure unit setting. Now use the"▲" and "
button to set the pressure of the unit, the unit of t pressure can be set to "hPa" or "inHg"
 Press " " to confirm your setting, switch to radio controlled clock(RCC) function setting, Now
use "▲" and "▼" buttons set the RCC receive function to activate(ON) or close(OFF)
 Press " " to confirm your setting, switch to daylight saving time (DST) function setting, Now
▼
use "▲" and " " buttons set the DST function to activate(ON) or close(OFF)
 Press " " to confirm your setting, switch to time zone setting, Now use "▲" and "▼" buttons
set a correct time zone (-2 to +2).
 Press " " to confirm your setting, switch to the 12/24 hour mode display setting. Now use
▼
"▲" and " " buttons to set the time displayed in 12-hour or 24-hour format
 Press " " to confirm your setting, switch to the hour setting. Now use "▲" and "
set the correct hour.
 Press " " to confirm your setting, switch to the minute setting. Now use "▲" and "
to set the correct minute.
 Press " " button to confirm your setting, switch to the year setting. Now use "▲" and "
buttons to set the correct year.
 Press " " button to confirm your setting, switch to the month setting. Now use "▲" and "
buttons to set the correct month.
 Press " " button to confirm your setting, switch to the date setting. Now use "▲" and "
buttons to set the correct date.
 Press " " button to confirm your setting, switch to the language selection for the week and
month displays setting. Now use "▲" and "
RB3409
" button more than 2 seconds to enter the time and general
▼
" buttons to select a language.
56
" button on the right side of the
▼
" buttons to set the unit of
▼
"
▼
" buttons to
▼
" buttons
▼
"
▼
"
▼
"