Canopy Operation - Beemoo Pro Max Bedienungsanleitung

ATTACH THE SEAT UNIT TO STROLLER FRAME
1. Insert the seat unit connectors into the housings, located on each
side of the chassis, until the connectors locks into place.
2. Install your car seat in the drivers-facing/rear-facing direction.
3. Change direction of the seat by simply lifting, rotating and attaching
the seat in the opposite direction.
4. To remove the seat unit from stroller frame, press the buttons on
each side of the seat and lift upwards.

CANOPY OPERATION

1. Attach the canopy to the back of the backrest using the Velcro.
2. Clamp each side of the canopy to the sides of the seat frame.
3. To extend the canopy, unzip the middle zipper to extend the hood
of the canopy.
LEG REST ADJUSTMENT
Press the buttons on
both sides of the leg rest
to adjust the position.
X2
X2
UK
6