Ex-Data; Technical Specification - Ecom Instruments Ex-Tp 20 Bedienungsanleitung

- Before carrying out any measurements always
ensure that the object which is to be measured is
not live.
- The device must only be used in accordance with
its designated purpose and must be handled with
due care.
Special conditions for use in areas clas-
sed as gas 0, dust 20 or mining M1
zones:
• It is only permissible for the Ex-TP 20 to brought
into the above zones and used there for measure-
ments within the constraints laid out above if the
following condition is satisfied.
• All of the relevant safety measures for entering,
taking the device into and working in these areas
must be followed.

5. Ex-Data

EC Certificate of Conformity No.:
Ex-Designation :
Approved for zone 0, device group II, gas
group C potentially explosive gases,
vapours or mist, temperature class T4.
Approved for zone 20, device group II, dust
with increased risk of explosion, temperatu-
re class T4.
Approved for category M 1, underground
excavation with increased risk of explosion.
ISSeP 03 ATEX 036 X
II 1 G D EEx ia IIC T4
I M 1 EEx ia I
20

6. Technical Specification

Ambient operating
temperature Ta:
Storage temperature:
Battery / power supply: 3 x LR03 nach IEC, AAA
Duration of operation:
Dimensions:
Weight :
IP-Protection type:
CE-Designation :
Sensor type:
Measuring range:
Reaction time:
Accuracy:
Resolution:
Measuring angle:
Measuring distance:
0°C ... +50°C
0°C ... +50°C
Duracell PC2400/MN2400
approx. 2.000 hours
165mm x 50mm x21mm
approx. 100g
(with batteries)
IP 65
0102
TC type K
-40°C ... 200°C
15 seconds max.
±1,5°C
1°C
Perpendicular to the mea-
sured surface up to a
maximum deviation of 10°
from perpendicular.
The surface of the sensor
MUST make contact.
21