Herunterladen Inhalt Inhalt Diese Seite drucken

Input Key Function; Reversing Channel Setup - Carson spyhawk basic Betriebsanleitung

Radio controlled plane rtf
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

j. Input Key Function
S/N
Identification
1
Throttle/Tail rotor stick
Mode 2
2
Nick/roll stick
Mode 2
GB
1
Throttle/Roll stick
Mode 1
2
Nick/Tail rotor function stick
Mode 1
3
Rudder Trim
4
Throttle Trim
5
Aileron Trim
6
Elevator-Trim
7
On/Off power switch
8
Neck strap eyelet
9
Antenna
k. Reversing Channel Setup
1. Nick reverse setup-servo (Elevator)
Hold down the ENT key for 1 second to enter the setting status.
Press the ENT key to enter the reverse setting status. Press ENT key
to choose Nick reverse (Elevator), and then hold the EXT key for
2 seconds to confirm and exit.
2. Roll reverse setup-servo (Aileron)
Hold down the ENT key for 1 second to enter the setting status. Press
the ENT key to enter the reverse setting status. Move the arrow to
"Roll" (Aileron) by the up/down key. Press the ENT key to choose
reverse and then hold the EXT key for 2 seconds to confirm and exit.
48
CARSON Spy Hawk • 50 050 5019 + 20 + 21 + 22
Function
Moving the lever forwards or backwards makes the model fly faster or slower. Moving the
lever to the left or right initiates a turn to the left or right.
Moving the lever forwards or backwards makes the model climb or descend. Moving the
lever to the left or right makes the model dip to the left or right.
Moving the lever forwards or backwards makes the model fly faster or slower. Moving the
lever to the left or right makes the model fly to the left or right.
Moving the lever forwards or backwards makes the model climb or descend. Moving the
lever to the left or right initiates a turn to the left or right.
The rudder trim is set for level flight.
Throttle adjustment stops the propeller spinning.
The rudder trim sets drifting to the left or right.
The elevator trim adjusts climb and descent.
Push the switch up to switch on the transmitter. Pull the levers down to switch the
transmitter off.
For a carrying belt so that the transmitter doesn't need to be held all the time.
Transmits wireless signal.
5805
Set reverse
Elevator
Aileron
Throttle
Rudder
Set sensitive X
Plane type
Expert mode No
Stick mode
5805
Set reverse
Elevator
Aileron
Throttle
Rudder
Set sensitive
Plane type
Expert mode No
Stick mode
HUBSAN
7.7V
-
Normal
Reverse
Normal
Normal
Helicopter
Mode 2
HUBSAN
7.7V
-
Normal
Reverse
Normal
Normal
X
Helicopter
Mode 2

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis