Rapoo ralemo Pre 5 Bedienungsanleitung Seite 3

English
Overview
@ MAC indicator
@Caps Lock indicator
@ Bluetooth indicator
@Charging/Low Battery indicator
Combination keys
= reduces backlight brightness
— increases backlight brightness
Homepage (only Windows)
= E-mail (only Windows)
= Multimedia player (only Windows)
previous Track
= Play / Pause
= Next Track
Mute
In Mac mode: the Windows key is used as OPTION key and the ALTkey is used as COMMAND key.
Lighting effect
Fn + Ctrl _ Right changing the mode of the background illumination.
Ripple, Static, Custom, Star and Wave.
LED status
1. Mac indicator: It keeps on in Mac mode and goes off in Windows mode.
2. Caps Lock indicator: Indicator is on when upper case letters are activated, and goes off when lower
Package contents
case letter are activated.
Mechanical Keyboard x 1
3. Bluetooth indicator: Bluetooth 1: Red, Bluetooth 2: Green, Bluetooth 3: Blue, 2.4 GHz: White.
• User Manual Xl
4. Charging / Low Battery indicator: the indicator stays white for 5 seconds when the power is on, the
• USB-A to CJSB-Ccable x 1
indicator flashes white slowly when the battery is low, the indicator Stays red while charging, and it
• USB Receiver x 1
turns off when charging is complete.
5. Keyboard backlight flashes when the voltage is low.
Wired
Fn + FIO = Volume
Connect the included cable into the keyboard and into a USB port on your computer.
Fn + Fl 1 = Volume*
Press Fn +5 to activate the wired
Fn + F12 =Windows/Mac mode
Fn + DEL = PrtSc function
2.4 GHz mode
Fn + 1 = Bluetooth mode 1
Plug the included USB receiver into a USBport on your computer.
Fn +2 Bluetooth mode 2
Press Fn + 4 to activate 2.4 GHz mode.
Fn + 3 = Bluetooth mode 3
Fn + 4 = 2.4GHz mode
Bluetooth pairing
Fn Wired mode
1. Press and hold the Bluetooth mode 1, 2 or 3 key combination (Fn+ 1/2/3) for more than 3 seconds to
connect a new device. The Bluetooth indicator will flash red/green/blue and the keyboard will be
discoverable
2. Follow the instructions below to complete Bluetooth pairing on your device.
The Bluetooth
(1) Open the Bluetooth settings on your device.
(2) Select "Rapoo 3.0KB" or "Rapoo 5.0KB" from the list.
2
Mode
mode.
for 60 seconds.
indicator will turn off when the connection is successful.