Herunterladen Diese Seite drucken
Technical Support and E-Warranty Certificate
www.vevor.com/support
FABRIC ROOM DIVIDE
USER MANUAL
PFDMFGHS01
PFDMFGSH02
PFDMFGMS03
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only
represents an estimate of savings you might benefit from buying certain tools
with us compared to the major top brands and does not necessarily mean to cover
all categories of tools offered by us. You are kindly reminded to verify carefully
when you are placing an order with us if you are actually Saving
Half in comparison with the top major brands.
loading

Inhaltszusammenfassung für VEVOR PFDMFGHS01

  • Seite 1 Technical Support and E-Warranty Certificate www.vevor.com/support FABRIC ROOM DIVIDE USER MANUAL PFDMFGHS01 PFDMFGSH02 PFDMFGMS03 We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
  • Seite 2 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if...
  • Seite 3 SAFETY INSTRUCTIONS WARNING: Read this material before using this product. Failure to do so can result in serious injury. Assembly precautions Assemble only according to these instructions. Improper assembly can create hazards. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
  • Seite 4 PARTS LIST Preloaded NOTE: F accessories are spare screws for gift; H is the fabric of the screen, pay attention not to get dirty when installing.
  • Seite 5 ASSEMBLY STEP STEP 1 Unscrew from material B and set aside. STEP 2 Unscrew from material C and set aside.
  • Seite 6 STEP 3 Unscrew from material D and set aside. STEP 4 Connect material C with material D, 2 in total.
  • Seite 7 STEP 5 Connect material B with material A, 2 in total. STEP 6 Marbles face down. Take the two rods of Step 4 and one rod of step 5, unscrew the screws, and connect them (as shown in the figure), pay attention The marble faces inward.
  • Seite 8 STEP 7 H Material is screen fabric, pay attention to keep clean during installation Note: The label should be at the bottom Insert the sleeve of material H into the upper and lower cross bars. STEP 8 The marble faces inward. Take the other combined pipe in Step 5 and assemble it in the frame of Step 7, pay attention to the screw that is unscrewed first, and then connect and tighten it (as shown in the figure), pay attention to the...
  • Seite 9 STEP 9 After installation, ensure that the two feet are 90° Assemble 2 pieces of material E into the frame in step 8; Note: In order to make the whole shelf more stable, when installing the foot, first insert the pipe into the foot, then through the unscrewed screw, and then connect, and tighten with the G tool...
  • Seite 10 STEP 10 After the installation is completed, arrange the fabric to ensure that the fabric is smooth. If the fabric has wrinkles, you can use a household hanging press to iron it. STEP 11...
  • Seite 11 PRODUCT PARAMETER Model PFDMFGHS01 PFDMFGSH02 PFDMFGMS03 Colour Black Gray Cream-Coloured Number of panels Product Size 1810*1815*500mm Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN. Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 YH CONSULTING LIMITED.
  • Seite 12 Technical Support and E-Warranty Certificate www.vevor.com/support...
  • Seite 13 Technique Certificat d'assistance et de garantie électronique www.vevor.com/support CLOISON DE SÉPARATION EN TISSU MANUEL D' utilisation PFDMFGHS01 PFDMFGSH02 PFDMFGMS03 Nous continuons à nous engager à vous fournir des outils à des prix compétitifs. « Économisez la moitié », « Moitié prix » ou toute autre expression similaire utilisée par nous uniquement représente une estimation des économies dont vous pourriez bénéficier en achetant...
  • Seite 14 Il s'agit de la notice d'utilisation d'origine. Veuillez lire attentivement toutes les instructions du manuel avant de l'utiliser. VEVOR se réserve le droit d'interpréter clairement notre manuel d'utilisation. L'apparence du produit dépend du produit que vous avez reçu. Veuillez nous excuser, nous ne vous informerons plus si des mises à...
  • Seite 15 SAFETY INSTRUCTIONS AVERTISSEMENT: Lisez ce document avant d'utiliser ce produit. Le non-respect de ces instructions peut entraîner des blessures graves. Précautions de montage Assembler uniquement selon ces instructions. Un assemblage incorrect peut créer des dangers. 10. Portez des lunettes de sécurité approuvées ANSI et des gants de travail robustes pendant l’assemblage.
  • Seite 16 12. Inspectez avant chaque utilisation ; ne pas utiliser si des pièces sont desserrées ou endommagées. CONSERVER CE MANUEL...
  • Seite 17 PARTS LIST P rechargé REMARQUE : Les accessoires F sont des vis de rechange en cadeau ; H est le tissu de l'écran, faites attention à ne pas vous salir lors de l'installation.
  • Seite 18 ASSEMBLY STEP ÉTAPE 1 Unscrew from material B and set aside. ÉTAPE 2 Unscrew from material C and set aside.
  • Seite 19 ÉTAPE 3 Unscrew from material D and set aside. ÉTAPE 4 Connect material C with material D, 2 in total.
  • Seite 20 ÉTAPE 5 Connect material B with material A, 2 in total. ÉTAPE 6 Marbles face down. Take the two rods of Step 4 and one rod of step 5, unscrew the screws, and connect them (as shown in the figure), pay attention The marble faces inward.
  • Seite 21 ÉTAPE 7 H Material is screen fabric, pay attention to keep clean during installation Note: The label should be at the bottom Insert the sleeve of material H into the upper and lower cross bars. ÉTAPE 8 The marble faces inward. Take the other combined pipe in Step 5 and assemble it in the frame of Step 7, pay attention to the screw that is unscrewed first, and then connect and tighten it (as shown in the figure), pay attention to the...
  • Seite 22 ÉTAPE 9 After installation, ensure that the two feet are 90° Assemble 2 pieces of material E into the frame in step 8; Note: In order to make the whole shelf more stable, when installing the foot, first insert the pipe into the foot, then through the unscrewed screw, and then connect, and tighten with the G tool...
  • Seite 23 ÉTAPE 10 After the installation is completed, arrange the fabric to ensure that the fabric is smooth. If the fabric has wrinkles, you can use a household hanging press to iron it. ÉTAPE 11...
  • Seite 24 PRODUCT PARAMETER Modèle PFDMFGHS01 PFDMFGSH02 PFDMFGMS03 Couleur crème​ Couleur​ Noir​ Gris​ ​ Nombre de panneaux Taille du produit 1810*1815*500mm Fabricant : Shanghaimuxinmuyeyouxiangongsi Adresse : Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200 000 CN. Importé Australie SIHAO LTD. ROKEVA STREETEASTWOOD NSW 2122 Australie Importé...
  • Seite 25 YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main.
  • Seite 26 Technique Certificat d'assistance et de garantie électronique www.vevor.com/support...
  • Seite 27 Technisch Support und E-Garantie-Zertifikat www.vevor.com/support RAUMTEILER AUS STOFF Benutzerhandbuch​ PFDMFGHS01 PFDMFGSH02 PFDMFGMS03 Wir sind weiterhin bestrebt, Ihnen Werkzeuge zu wettbewerbsfähigen Preisen anzubieten. "Sparen Sie die Hälfte", "Halber Preis" oder andere ähnliche Ausdrücke, die wir nur verwenden stellt eine Schätzung der Einsparungen dar, die Sie durch den Kauf bestimmter Werkzeuge erzielen können...
  • Seite 28 Hälfte im Vergleich mit den Top-Großmarken.
  • Seite 29 Dies ist die Originalanleitung. Bitte lesen Sie alle Anweisungen sorgfältig durch, bevor Sie das Gerät in Betrieb nehmen. VEVOR behält sich eine klare Auslegung unserer Bedienungsanleitung vor. Das Erscheinungsbild des Produkts richtet sich nach dem Produkt, das Sie erhalten haben. Bitte verzeihen Sie uns, dass wir Sie nicht erneut informieren, wenn es Technologie- oder Software-Updates für unser Produkt gibt .
  • Seite 30 SAFETY INSTRUCTIONS WARNUNG: Lesen Sie dieses Material, bevor Sie dieses Produkt verwenden. Andernfalls kann es zu schweren Verletzungen kommen. Vorsichtsmaßnahmen bei der Montage 17. Führen Sie die Montage nur gemäß dieser Anleitung durch. Eine unsachgemäße Montage kann zu Gefahren führen. 18.
  • Seite 31: Bewahren Sie Dieses Handbuch Auf

    18. Vor jedem Gebrauch prüfen; nicht verwenden, wenn Teile lose oder beschädigt sind. BEWAHREN SIE DIESES HANDBUCH AUF...
  • Seite 32 PARTS LIST Vorgeladen​ HINWEIS : Bei Zubehör F handelt es sich um Ersatzschrauben als Geschenk; H ist der Stoff des Bildschirms. Achten Sie darauf, dass er bei der Installation nicht schmutzig wird.
  • Seite 33 ASSEMBLY STEP SCHRITT 1 Unscrew from material B and set aside. SCHRITT 2 Unscrew from material C and set aside.
  • Seite 34 SCHRITT 3 Unscrew from material D and set aside. SCHRITT 4 Connect material C with material D, 2 in total.
  • Seite 35 SCHRITT 5 Connect material B with material A, 2 in total. SCHRITT 6 Marbles face down. Take the two rods of Step 4 and one rod of step 5, unscrew the screws, and connect them (as shown in the figure), pay attention The marble faces inward.
  • Seite 36 SCHRITT 7 H Material is screen fabric, pay attention to keep clean during installation Note: The label should be at the bottom Insert the sleeve of material H into the upper and lower cross bars. SCHRITT 8 The marble faces inward. Take the other combined pipe in Step 5 and assemble it in the frame of Step 7, pay attention to the screw that is unscrewed first, and then connect and tighten it (as shown in the figure), pay attention to the...
  • Seite 37 SCHRITT 9 After installation, ensure that the two feet are 90° Assemble 2 pieces of material E into the frame in step 8; Note: In order to make the whole shelf more stable, when installing the foot, first insert the pipe into the foot, then through the unscrewed screw, and then connect, and tighten with the G tool...
  • Seite 38 SCHRITT 10 After the installation is completed, arrange the fabric to ensure that the fabric is smooth. If the fabric has wrinkles, you can use a household hanging press to iron it. SCHRITT 11...
  • Seite 39 PRODUCT PARAMETER Modell PFDMFGHS01 PFDMFGSH02 PFDMFGMS03 Cremefarben​ Farbe​ Schwarz​ Grau​ ​ ​ Anzahl der Panels Produktgröße 1810 x 1815 x 500 mm Hersteller: Shanghaimuxinmuyeyouxiangongsi Adresse: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai, 200.000 CN. Nach importiert: SIHAO LTD. ROKEVA STREETEASTWOOD NSW 2122 Australien Importiert in die USA: Sanven Technology Ltd.
  • Seite 40 YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main.
  • Seite 41 Technisch Support und E-Garantie-Zertifikat www.vevor.com/support...
  • Seite 42 Tecnico Supporto e certificato di garanzia elettronica www.vevor.com/support DIVISORIO IN TESSUTO MANUALE D' uso PFDMFGHS01 PFDMGSH02 PFDMGMS03 Continuiamo a impegnarci per fornirvi strumenti a prezzi competitivi. "Risparmia la metà", "Metà prezzo" o altre espressioni simili utilizzate solo da noi rappresenta una stima dei risparmi che potresti ottenere acquistando determinati strumenti con noi rispetto ai principali marchi top e non significa necessariamente copertina tutte le categorie di strumenti da noi offerti.
  • Seite 43 Questa è l'istruzione originale, si prega di leggere attentamente tutte le istruzioni del manuale prima di utilizzare. VEVOR si riserva una chiara interpretazione del nostro manuale utente. L'aspetto del prodotto sarà soggetto al prodotto ricevuto. Vi preghiamo di perdonarci se non vi informeremo di nuovo se ci sono aggiornamenti tecnologici o software sul nostro prodotto.
  • Seite 44 SAFETY INSTRUCTIONS AVVERTIMENTO: Leggere questo materiale prima di utilizzare questo prodotto. La mancata osservanza di questa precauzione può causare gravi lesioni. Precauzioni di montaggio 25. Montare solo secondo queste istruzioni. Un montaggio improprio può creare pericoli. 26. Durante il montaggio, indossare occhiali di sicurezza omologati ANSI e guanti da lavoro resistenti.
  • Seite 45 SALVA QUESTO MANUALE...
  • Seite 46 PARTS LIST ricaricato NOTA : gli accessori F sono viti di ricambio in regalo; H è il tessuto dello schermo, fare attenzione sporcarlo durante l'installazione.
  • Seite 47 ASSEMBLY STEP PASSO 1 Unscrew from material B and set aside. PASSO 2 Unscrew from material C and set aside.
  • Seite 48 PASSO 3 Unscrew from material D and set aside. PASSO 4 Connect material C with material D, 2 in total.
  • Seite 49 PASSO 5 Connect material B with material A, 2 in total. PASSO 6 Marbles face down. Take the two rods of Step 4 and one rod of step 5, unscrew the screws, and connect them (as shown in the figure), pay attention The marble faces inward.
  • Seite 50 PASSO 7 H Material is screen fabric, pay attention to keep clean during installation Note: The label should be at the bottom Insert the sleeve of material H into the upper and lower cross bars. PASSO 8 The marble faces inward. Take the other combined pipe in Step 5 and assemble it in the frame of Step 7, pay attention to the screw that is unscrewed first, and then connect and tighten it (as shown in the figure), pay attention to the...
  • Seite 51 PASSO 9 After installation, ensure that the two feet are 90° Assemble 2 pieces of material E into the frame in step 8; Note: In order to make the whole shelf more stable, when installing the foot, first insert the pipe into the foot, then through the unscrewed screw, and then connect, and tighten with the G tool...
  • Seite 52 PASSO 10 After the installation is completed, arrange the fabric to ensure that the fabric is smooth. If the fabric has wrinkles, you can use a household hanging press to iron it. PASSO 11...
  • Seite 53 PRODUCT PARAMETER Modello PFDMFGHS01 PFDMGSH02 PFDMGMS03 Colore​ Nero​ Grigio​ C ome crema​ Numero di pannelli Dimensioni del 1810*1815*500mm prodotto Produttore: Shanghaimuxinmuyeyouxiangongsi Indirizzo: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN. Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD Nuovo Galles del Sud 2122 Australia Importato negli USA: Sanven Technology Ltd.
  • Seite 54 Tecnico Supporto e certificato di garanzia elettronica www.vevor.com/support...
  • Seite 55 Técnico Certificado de soporte y garantía electrónica www.vevor.com/support DIVIDIR HABITACIÓN CON TELA de USUARIO PFDMFGHS01 PFDMFGSH02 PFDMFGMS03 Seguimos comprometidos a brindarle herramientas a precios competitivos. "Ahorra la mitad", "mitad de precio" o cualquier otra expresión similar utilizada únicamente por nosotros Representa una estimación de los ahorros que podría obtener al comprar ciertas...
  • Seite 57 Estas son las instrucciones originales, lea atentamente todas las instrucciones del manual antes de utilizar el producto. VEVOR se reserva una interpretación clara de nuestro manual de usuario. La apariencia del producto estará sujeta al producto que recibió. Perdónenos por no informarle nuevamente si hay actualizaciones de tecnología o software...
  • Seite 58 SAFETY INSTRUCTIONS ADVERTENCIA: Lea este material antes de utilizar este producto. No hacerlo puede provocar lesiones graves. Precauciones de montaje 33. Realice el montaje únicamente de acuerdo con estas instrucciones. Un montaje inadecuado puede generar peligros. 34. Use gafas de seguridad aprobadas por ANSI y guantes de trabajo resistentes durante el montaje.
  • Seite 59 dañadas. GUARDE ESTE MANUAL...
  • Seite 60 PARTS LIST GRAMO recargado NOTA : Los accesorios F son tornillos de repuesto para regalo; H es la tela de la pantalla, preste atención para no ensuciarse durante la instalación.
  • Seite 61 ASSEMBLY STEP PASO 1 Unscrew from material B and set aside. PASO 2 Unscrew from material C and set aside.
  • Seite 62 PASO 3 Unscrew from material D and set aside. PASO 4 Connect material C with material D, 2 in total.
  • Seite 63 PASO 5 Connect material B with material A, 2 in total. PASO 6 Marbles face down. Take the two rods of Step 4 and one rod of step 5, unscrew the screws, and connect them (as shown in the figure), pay attention The marble faces inward.
  • Seite 64 PASO 7 H Material is screen fabric, pay attention to keep clean during installation Note: The label should be at the bottom Insert the sleeve of material H into the upper and lower cross bars. PASO 8 The marble faces inward. Take the other combined pipe in Step 5 and assemble it in the frame of Step 7, pay attention to the screw that is unscrewed first, and then connect and tighten it (as shown in the figure), pay attention to the...
  • Seite 65 PASO 9 After installation, ensure that the two feet are 90° Assemble 2 pieces of material E into the frame in step 8; Note: In order to make the whole shelf more stable, when installing the foot, first insert the pipe into the foot, then through the unscrewed screw, and then connect, and tighten with the G tool...
  • Seite 66 PASO 10 After the installation is completed, arrange the fabric to ensure that the fabric is smooth. If the fabric has wrinkles, you can use a household hanging press to iron it. PASO 11...
  • Seite 67 PRODUCT PARAMETER Modelo PFDMFGHS01 PFDMFGSH02 PFDMFGMS03 Color​ Negro​ Gris​ C rema- Color​ Número de paneles Tamaño del 1810*1815*500 mm producto Fabricante: Shanghaimuxinmuyeyouxiangongsi Dirección: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shangai 200000 CN. Importado Australia: SIHAO LTD. ROKEVA STREETEASTWOOD Nueva Gales del Sur 2122 Australia Importado a EE.
  • Seite 68 YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main.
  • Seite 69 Técnico Certificado de soporte y garantía electrónica www.vevor.com/support...
  • Seite 70 Techniczny Wsparcie i certyfikat e-gwarancji www.vevor.com/support PRZEGRODA POKOJU Z TKANINY INSTRUKCJA obsługi PFDMFGHS01 PFDMFGSH02 PFDMFGMS03 Nadal staramy się oferować Państwu narzędzia w konkurencyjnych cenach. „Oszczędź połowę”, „Połowa ceny” lub jakiekolwiek inne podobne wyrażenia używane wyłącznie przez nas przedstawia szacunkowe oszczędności, jakie możesz uzyskać kupując określone narzędzia...
  • Seite 71 Wsparcie techniczne i certyfikat e-gwarancji www.vevor.com/support To jest oryginalna instrukcja, przed użyciem należy uważnie przeczytać wszystkie instrukcje. VEVOR zastrzega sobie jasną interpretację naszej instrukcji obsługi. Wygląd produktu będzie zależał od produktu, który otrzymałeś. Prosimy o wybaczenie, że nie poinformujemy Cię ponownie, jeśli w naszym produkcie pojawią...
  • Seite 72 SAFETY INSTRUCTIONS OSTRZEŻENIE: Przeczytaj ten materiał przed użyciem tego produktu. Nieprzestrzeganie tego może spowodować poważne obrażenia. Środki ostrożności podczas montażu 41. Montaż należy wykonywać wyłącznie zgodnie z niniejszą instrukcją. Nieprawidłowy montaż może stwarzać zagrożenia. 42. Podczas montażu należy nosić okulary ochronne z atestem ANSI oraz wytrzymałe rękawice robocze.
  • Seite 73 działową Fabric Room Divide. 35. Stosować wyłącznie zgodnie z przeznaczeniem. 36. Przed każdym użyciem należy przeprowadzić kontrolę. Nie należy używać produktu, jeśli jakieś części są luźne lub uszkodzone. ZAPISZ TĘ INSTRUKCJĘ...
  • Seite 74 PARTS LIST Wstępnie załadowane UWAGA : Akcesoria F to zapasowe śrubki do kupienia w prezencie; H to materiał ekranu, należy uważać, aby się nie zabrudził podczas instalacji.
  • Seite 75 ASSEMBLY STEP KROK 1 Unscrew from material B and set aside. KROK 2 Unscrew from material C and set aside.
  • Seite 76 KROK 3 Unscrew from material D and set aside. KROK 4 Connect material C with material D, 2 in total.
  • Seite 77 KROK 5 Connect material B with material A, 2 in total. KROK 6 Marbles face down. Take the two rods of Step 4 and one rod of step 5, unscrew the screws, and connect them (as shown in the figure), pay attention The marble faces inward.
  • Seite 78 KROK 7 H Material is screen fabric, pay attention to keep clean during installation Note: The label should be at the bottom Insert the sleeve of material H into the upper and lower cross bars. KROK 8 The marble faces inward. Take the other combined pipe in Step 5 and assemble it in the frame of Step 7, pay attention to the screw that is unscrewed first, and then connect and tighten it (as shown in the figure), pay attention to the...
  • Seite 79 KROK 9 After installation, ensure that the two feet are 90° Assemble 2 pieces of material E into the frame in step 8; Note: In order to make the whole shelf more stable, when installing the foot, first insert the pipe into the foot, then through the unscrewed screw, and then connect, and tighten with the G tool...
  • Seite 80 KROK 10 After the installation is completed, arrange the fabric to ensure that the fabric is smooth. If the fabric has wrinkles, you can use a household hanging press to iron it. KROK 11...
  • Seite 81 PRODUCT PARAMETER Model PFDMFGHS01 PFDMFGSH02 PFDMFGMS03 Kremowy - Kolor​ Czarny​ Szary​ Kolorowy​ Liczba paneli Rozmiar produktu 1810*1815*500 mm Producent: Shanghaimuxinmuyeyouxiangongsi Adres: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Szanghaj 200000 CN. Importowane AUS: SIHAO LTD. ROKEVA STREETEASTWOOD NSW 2122 Australia Importowane do USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim...
  • Seite 82 YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main.
  • Seite 83 Techniczny Wsparcie i certyfikat e-gwarancji www.vevor.com/support...
  • Seite 84 Technisch Ondersteuning en E-garantiecertificaat www.vevor.com/support STOFFEN KAMERVERDELING Gebruikershandleiding​ PFDMFGHS01 PFDMFGSH02 PFDMFGMS03 Wij streven er voortdurend naar om u gereedschappen tegen concurrerende prijzen te leveren. "Bespaar de helft", "halve prijs" of andere soortgelijke uitdrukkingen die alleen door ons worden gebruikt geeft een schatting van de besparingen die u kunt behalen door bepaalde gereedschappen...
  • Seite 85 wanneer u een bestelling bij ons plaatst, als u daadwerkelijk Besparing Half in vergelijking met de grote topmerken.
  • Seite 86 Dit is de originele instructie, lees alle handleidingen zorgvuldig door voordat u het product gebruikt. VEVOR behoudt zich een duidelijke interpretatie van onze gebruikershandleiding voor. Het uiterlijk van het product is afhankelijk van het product dat u hebt ontvangen. Vergeef ons dat we u niet opnieuw zullen informeren als er technologie- of software-updates voor ons product zijn .
  • Seite 87 SAFETY INSTRUCTIONS WAARSCHUWING: Lees dit materiaal voordat u dit product gebruikt. Als u dit niet doet, kan dit leiden tot ernstig letsel. Voorzorgsmaatregelen bij de montage 49. Monteer alleen volgens deze instructies. Onjuiste montage kan gevaren opleveren. 50. Draag tijdens de montage een ANSI-goedgekeurde veiligheidsbril en stevige werkhandschoenen.
  • Seite 88 onderdelen loszitten of beschadigd zijn. BEWAAR DEZE HANDLEIDING...
  • Seite 89 PARTS LIST Vooraf opnieuw geladen LET OP : De accessoires F zijn reserveschroeven voor cadeaus; H is de stof van het scherm. Let op dat deze niet vies wordt tijdens de installatie.
  • Seite 90 ASSEMBLY STEP STAP 1 Unscrew from material B and set aside. STAP 2 Unscrew from material C and set aside.
  • Seite 91 STAP 3 Unscrew from material D and set aside. STAP 4 Connect material C with material D, 2 in total.
  • Seite 92 STAP 5 Connect material B with material A, 2 in total. STAP 6 Marbles face down. Take the two rods of Step 4 and one rod of step 5, unscrew the screws, and connect them (as shown in the figure), pay attention The marble faces inward.
  • Seite 93 STAP 7 H Material is screen fabric, pay attention to keep clean during installation Note: The label should be at the bottom Insert the sleeve of material H into the upper and lower cross bars. STAP 8 The marble faces inward. Take the other combined pipe in Step 5 and assemble it in the frame of Step 7, pay attention to the screw that is unscrewed first, and then connect and tighten it (as shown in the figure), pay attention to the...
  • Seite 94 STAP 9 After installation, ensure that the two feet are 90° Assemble 2 pieces of material E into the frame in step 8; Note: In order to make the whole shelf more stable, when installing the foot, first insert the pipe into the foot, then through the unscrewed screw, and then connect, and tighten with the G tool...
  • Seite 95 STAP 10 After the installation is completed, arrange the fabric to ensure that the fabric is smooth. If the fabric has wrinkles, you can use a household hanging press to iron it. STAP 11...
  • Seite 96 PRODUCT PARAMETER Model PFDMFGHS01 PFDMFGSH02 PFDMFGMS03 Crèmekleurig​ Kleur​ B gebrek Grijs​ ​ ​ Aantal panelen Productgrootte 1810*1815*500mm Fabrikant: Shanghaimuxinmuyeyouxiangongsi Adres: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Sjanghai 200000 CN. Geïmporteerd naar AUS: SIHAO LTD. ROKEVA STREETEASTWOOD NSW 2122 Australië Geïmporteerd naar de VS: Sanven Technology Ltd. Suite 250, 9166...
  • Seite 97 YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main.
  • Seite 98 Technisch Ondersteuning en E-garantiecertificaat www.vevor.com/support...
  • Seite 99 Teknisk Support och e-garanticertifikat www.vevor.com/support TYG RUMSDELNING Användarmanual​ PFDMFGHS01 PFDMFGSH02 PFDMFGMS03 Vi fortsätter att vara engagerade i att ge dig verktyg till konkurrenskraftiga priser. "Spara hälften", "Halva priset" eller andra liknande uttryck som endast används av oss representerar en uppskattning av besparingar du kan dra nytta av att köpa vissa verktyg med oss jämfört med de stora toppmärkena och betyder inte nödvändigtvis att täcka...
  • Seite 100 Detta är den ursprungliga instruktionen, läs alla instruktioner noggrant innan du använder den. VEVOR reserverar sig för en tydlig tolkning av vår användarmanual. Utseendet på produkten är beroende av den produkt du fått. Ursäkta oss att vi inte kommer att informera dig igen om det finns...
  • Seite 101 SAFETY INSTRUCTIONS VARNING: Läs detta material innan du använder denna produkt. Underlåtenhet att göra det kan resultera i allvarliga skador. Försiktighetsåtgärder vid montering 57. Montera endast enligt dessa instruktioner. Felaktig montering kan skapa faror. 58. Använd ANSI-godkända skyddsglasögon och kraftiga arbetshandskar vid montering.
  • Seite 102 SPARA DENNA MANUAL...
  • Seite 103 PARTS LIST P laddas OBS : F-tillbehör är reservskruvar för present; H är skärmens tyg, var uppmärksam på att inte bli smutsig vid installation.
  • Seite 104 ASSEMBLY STEP STEG 1 Unscrew from material B and set aside. STEG 2 Unscrew from material C and set aside.
  • Seite 105 STEG 3 Unscrew from material D and set aside. STEG 4 Connect material C with material D, 2 in total.
  • Seite 106 STEG 5 Connect material B with material A, 2 in total. STEG 6 Marbles face down. Take the two rods of Step 4 and one rod of step 5, unscrew the screws, and connect them (as shown in the figure), pay attention The marble faces inward.
  • Seite 107 STEG 7 H Material is screen fabric, pay attention to keep clean during installation Note: The label should be at the bottom Insert the sleeve of material H into the upper and lower cross bars. STEG 8 The marble faces inward. Take the other combined pipe in Step 5 and assemble it in the frame of Step 7, pay attention to the screw that is unscrewed first, and then connect and tighten it (as shown in the figure), pay attention to the...
  • Seite 108 STEG 9 After installation, ensure that the two feet are 90° Assemble 2 pieces of material E into the frame in step 8; Note: In order to make the whole shelf more stable, when installing the foot, first insert the pipe into the foot, then through the unscrewed screw, and then connect, and tighten with the G tool...
  • Seite 109 STEG 10 After the installation is completed, arrange the fabric to ensure that the fabric is smooth. If the fabric has wrinkles, you can use a household hanging press to iron it. STEG 11...
  • Seite 110 PRODUCT PARAMETER Modell PFDMFGHS01 PFDMFGSH02 PFDMFGMS03 C ream- Färgad Färg​ B brist G ray ​ Antal paneler Produktstorlek 1810*1815*500mm Tillverkare: Shanghaimuxinmuyeyouxiangongsi Adress: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200 000 CN. Importerad till AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australien Importerad till USA: Sanven Technology Ltd.
  • Seite 111 Teknisk Support och e-garanticertifikat www.vevor.com/support...

Diese Anleitung auch für:

Pfdmfgsh02Pfdmfgms03Pfdmghs01