Atari COMPUTER 600XL Bedienungsanleitung Seite 3

1. CONNECTING
THE COMPUTER
TO YOUR
TELEVISION
2. CONNECTING
THE COMPUTER
TO YOUR VIDEO
MONITOR
3. CONNECTING
THE COMPUTER
POWER SUPPLY
Disconnect the television
antenna from the antenna
socket on the back of you
television set.
Connect one end of the RF
Cable to the socket marked
"television" on the back of
the computer.
Connect one end of the mon-
itor cable 5-pin plug (not
included with Purchase) to
the socket marked "monitor"
on the back of the computer.
Connect the other end of the
monitor cable to the moitor
according to the instructions
provided with your monitor.
Connect plug from power
adapter to electrical outlet.
Connect round 7-pin plug
into the "power-in" socket on
the back of the computer.
4. Turn on your television
and tune it to channel 36
(United Kingdom), channel 4
(Germany), or apprxpridte
station as indicated by your
ATARI Computer dealer.
Connect the other end of the
RF Cable to the antenna
socket on the back of your
television set.
5.
Switch "on" power
located cn the right side of
the back of the computer
console.
A few seconds later the word
"Ready" will appear on the
television screen.
6. If youleave thecomputer
on one display long enough,
the colors on your TV screen
begin changing periodically.
This is norrnal and occurs to
protect your TV set.
Please note that when you
turn off the computer, you
must wait 3 to 5 seconds
before turning it back on.