Intended Use; Additional Battery Safety Warnings - Ryobi Rda4-0 Originalanleitung

ORIGINAL INSTRUCTIONS
EN
Safety, performance, and dependability
have been given top priority in the
design of your drain auger.

INTENDED USE

The drain auger is intended for clearing
obstructions from sinks, showers, and
bathtubs.
Do not use the product for any other
purpose. Use of the product for
operations different from intended use
could result in a hazardous situation.
WARNING! Read
warnings, instructions, illustrations
and specifications provided with
this power tool. Failure to follow all
instructions listed below may result in
Save all warnings and instructions
for future reference.
DRAIN AUGER SAFETY WARNINGS
Only grasp the rotating cable
with gloves recommended by the
manufacturer. Latex or loose-fitting
gloves or rags can become wrapped
around the cable and may result in
Do not allow the cutter to stop
turning while the cable is turning.
This can overstress the cable and
may cause twisting, kinking or
breaking of the cable and may result
Use latex or rubber gloves inside
the gloves recommended
the manufacturer, goggles, face
shields, protective
and respirator when chemicals,
bacteria or other toxic or infectious
substances are suspected to be
in a drain line. Drains may contain
chemicals,
substances that may cause burns,
be toxic or infectious or may result in
Practice good hygiene. Do not
eat or smoke while handling or
operating the tool. After handling
or
equipment, use hot, soapy water
to wash hands and other body
parts exposed to drain contents.
This will help reduce the risk of
health hazards due to exposure to
toxic or infectious material.
Only use the drain cleaner for
all safety
the recommended drain sizes.
Using the wrong size drain cleaner
can lead to twisting, kinking or
breaking of the cable and may
Position the drain auger within
50 mm of the drain or inlet being
cleared. Operating the product at
greater distances can result in the
cable twisting or binding.
When removing the cable from
a drain, remove it slowly to avoid
"splash back".
Ambient temperature range for tool
during operation is between 0 °C
and 40 °C.
Ambient temperature range for tool
storage is between 0 °C and 40 °C.
The
temperature range for the charging
system during charging is between
10 °C and 38 °C.
by
ADDITIONAL BATTERY SAFETY
WARNINGS
clothing,
To reduce the risk of fire, personal
to a short circuit, never immerse
your tool, battery pack or charger in
bacteria and
operating drain
recommended
other
cleaning
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
ambient
TR
EL
3