Herunterladen Diese Seite drucken

Endress+Hauser Promass 200/TB2 Einbauanleitung Seite 2

Austausch i/o-modul
Vorschau ausblenden Andere Handbücher für Promass 200/TB2:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

I/O-Module
Confirmation whether the spare part is permitted to be used with the measuring device
The spare parts set and Installation Instructions are used to replace a faulty unit with a functioning unit of the same type. 
Use genuine parts from Endress+Hauser only.
Only original spare parts supplied by Endress+Hauser shall be used with the measuring device. Therefore, before use, check whether
the spare part set is compatible with the measuring device.
A spare parts overview label is located in the connection compartment cover of the measuring device. If there is no label or the spare
part is not listed the appropriate spare part can also be identified via W@M Device Viewer.
How carrying out such a check via the W@M Device Viewer is described below:
Choose the Endress+Hauser Device Viewer via web browser: www.endress.com/deviceviewer
Enter the serial number (Ser. No.) of the device into the W@M Device Viewer (on the label of the transmitter), then click on "Spare
parts".
The list of the available spare parts for the device is displayed.
Check the order number on the packaging label of the spare part set.
Check whether the order number of the spare part set is specified in the list displayed by the device viewer:
= YES, the spare part can be used.
= NO, the spare part may not be used.
If you have any questions, contact your Endress+Hauser service organization.
Overview of the personnel authorized to carry out repairs
Authorization to carry out a repair depends on the approval of the measuring device. The table shows the respective group of persons for each.
NOTICE
The person who carries out the repair is responsible for safety during the work, the quality of work completed and safety of the 
device after repair.
Version of spare part
I/O-Module: 2-wire
1 Trained customer technician
2 Service technician authorized by Endress+Hauser
3 Endress+Hauser (send measuring device back to manufacturer)
2
2.
Ser. No.:12345
i
i
www.endress.com/deviceviewer
1.
Device Viewer
Ser. No.:12345
4.
Group of persons authorized to carry out repairs
3.
=
?
5.
1, 2, 3
A0016264
Endress + Hauser

Werbung

loading

Diese Anleitung auch für:

Prosonic flow 200Promag 200Prowirl 200