two trees TTS Produktanleitung Seite 7

Check whether the POM wheel of the left and right
whether the movement is smooth and there is no jam
Left unit
Right unit
Eccentric nuts
Note: @ It is the most appropriate position to feel a little friction between the POM wheel
and the profile when rotating the POM wheel.
@ If the wheel rotates in the air and does not fit the profile, the eccentric nut can be
adjusted clockwise from the direction of the screw head with an open-end
09
parts of the Y-axis fits the profile, and
Eccentric nuts
wrench.
3.1Put the synchronous belt of the carriage on the synchronous wheel of the X-axis motor
Carriage and lifting module XI
The teeth of the timing
belt face the timing
EN
pulley
dVN1äO XUN Uu
d'NlUO ION 00 9-000 L-nz
10