Faults And Damages - Ruggear Rg170 Kurzanleitung

withdraw it any time without prior notice. Changes, errors
withdraw it any time without prior notice. Changes, errors
and misprints may not be used as a basis for any claim for
and misprints may not be used as a basis for any claim for
damages. All rights reserved.
damages. All rights reserved.
Power Idea Technology (Shenzhen) Co., Ltd. cannot
Power Idea Technology (Shenzhen) Co„ Ltd. cannot
be held responsible for any data or other loss and direct
be held responsible for any data or other loss and direct
or indirect damages caused by any improper use of this
or indirect damages caused by any improper use of this
device.
device.
4. EU-DECLARATION OF CONFORMITY
a. EU-DECLARATION
The EU-declaration of conformity can be found
The EU-declaration of conformity can be found
at the end of this manual.
at the end of this manual.

5. FAULTS AND DAMAGES

5. FAULTS AND DAMAGES
If there is any reason to suspect that the safety of the
If there is any reason to suspect that the safety of he
device has been compromised, it must be withdrawn
device has been compromised,
from use immediately.
from use immediately.
Measures must be taken to prevent any accidental
Measures must be taken to prevent any accidental
restarting of the device. The safety of the device may be
restarting of the device. The safety of the device may be
compromised, if, for example:
compromised, if, for example:
• Malfunctions occur.
• Malfunctions occur.
• The housing of the device shows damage.
• The housing of the device shows damage.
• The device has been exposed to excessive loads.
• The device has been exposed to excessive loads.
• The device has been stored improperly.
• The device has been stored improperly.
• Markings or labels on the device are illegible.
• Markings or labels on the device are illegible.
We recommend that a device displaying errors or in
We recommend that a device displaying errors or in
which an error is suspected be sent back to Power Idea
which an error is suspected be sent back to Power Idea
Technology (Shenzhen) Co., Ltd. to be checked.
Technology (Shenzhen) Co., Ltd. to be checked.
6. FURTHER SAFETY ADVICE
6. FURTHER SAFETY
• Do not touch the screen of the device with sharp
• Do not touch the screen of the device with sharp
objects. Dust particles and nails may scratch the screen.
objects. Dust particles and nails may scratch the screen.
Please keep the screen clean. Gently remove dust from
Please keep the screen clean. Gently remove dust from
the screen with a soft cloth and do not scratch the
the screen with a soft
screen.
screen.
• Do not leave the device in environments with excessive
• Do not leave the device
temperatures, as this could lead to heating of the attery,
temperatures, as this could lead to heating of the attery,
resulting in fire or explosion.
resulting in fire or explosion.
• Do not charge the device near any flammable or
• Do not charge the device near any flammable or
explosive substances.
explosive substances.
• Charge the device under dry indoor conditions only.
• Charge the device under dry indoor conditions only.
• Do not charge the device in environments with heavy
• Do not charge the device in environments with heavy
dust or humidity.
dust or humidity.
• Do not use the device in areas where regulations or leg
• Do not use the device in areas where regulations or leg
legislation prohibit use.
legislation prohibit use.
• Do not expose the device or charger to strong magnetic
• Do not expose the device or charger to strong magnetic
fields, such as those emitted from induction ovens or
fields, such as those emitted
microwaves.
microwaves.
• Do not attempt to open or repair the device. Improper
• Do not attempt to open or repair the device. Improper
repair or opening can lead to the destruction of the
repair or opening can lead to the destruction of the
OF CONFORMITY
must be withdrawn
ADVICE
cloth and do not
in environments
from induction
scratch the
with excessive
ovens or
5
EN