UbiBot GS2 Benutzerhandbuch Seite 9

DEVICE SETUP
Before you set up the device on mobile data, please check the APN information of the SIMcard used
for the UbiBot device.
An APN (Access Point Name) provides the details your device needs to connect to mobile data
through your network operator. APN details differ by network and you will need to get these from
your network operator.
With the device off, insert the SIMcard as indicated in the picture below. Launch the app and log in.
Tap "+" to start setting up the device. Pleasefollow the •n-app instructions to complete the setup
process. Please note, the setup will fail if you don't have sufficient data allowance.
O
DEVICE SETUP
STEPI.
Launch the App and log in. With the device switched on, use the Type C USBcable provided with
your device to connect your device to the computer. The Tools will automatically scan your device
and enter the device page.
STEP2.
Click "Network" on the left menu bar. There you will be able to set up the device on WiFi or mobile
data.
USING THE APP FOR MOBILE
o
USING PC TOOLS
NETWORK
Micro SIM Slot
7
ENGLISH
*