Taurus AMAZING FA007 Bedienungsanleitung Seite 7

are sold with a protective covering)
- Put the battery in its compartment, respecting
the polarity
- Replace the cover of the battery compartment.
- N.B. When changing the batteries, the confi-
guration of the appliance will be removed, and
you will need to reset the parameters of the
appliance.
ASSEMBLING THE BASE:
- Fit the base with the column and secure it with
the screws provided (Fig.1).
- To fix the base into the appliance, place the
appliance face down.
- Fit the base on the main body of the appliance.
- Fix the base using the screws provided.
- Stand the appliance up again so as to check
that the base works properly.
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all products' packaging has
been removed.
- Prepare the appliance according to the function
you wish to use:
USE:
- Extend the cable completely before plugging
it in.
- Attach the appliance to its base making sure
that it is correctly fitted into place.
- Connect the appliance to the mains.
- Guide the appliance to direct the flow of air in
the desired direction.
- Turn the appliance on, by using the on/off
button.
- Select the desired speed.
SCREEN BRIGHTNESS:
- Press (6) button to set LED screen brightness:
100%,50%, off display (Only handled through
remote)
MODES
- Press mode button (4) to select working mode:
- Normal mode (Display current speed setting
F1/F2/F3/SF)
- Nature mode
- Sleep mode
FAN FUNCTION:
- Select the desired ventilation speed.
- F1: Low Speed
- F2: Medium Speed
- F3: High Speed
- SF: Soft Speed
TIMER FUNCTION:
- To program the operating time simply select it
- Press button 5 to set the timer, the display will
show 0h(timer cancel), 1h, 2h...9h, in a conti-
nuous cycle.
- After the selected time the appliance will switch
off automatically.
OSCILLATION FUNCTION:
- The oscillation function makes it possible to
direct the flow from the apparatus so that it
automatically alternates over a range of 75º.
- To activate this function, press the (3) switch.
- To deactivate this function, follow the procedu-
re for switching it on in reverse.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Turn the appliance off, using the on/off switch.
- Unplug the appliance from the mains.
- Clean the appliance.
SAFETY THERMAL PROTECTOR:
- The appliance has a safety device, which pro-
tects the appliance from overheating.
- If the machine does not start again seek autho-
rised technical assistance.
CLEANING
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
- If the appliance is not in good condition of
cleanliness, its surface may degrade and