zopa MOVE Bedienungsanleitung Seite 22

16c. Using the harness :
To securethe harness,bring together both parts of the safety be ts and click into the belt buckle (left
and right side), see image 16c.
To release the harness, press the button on the belt buckle as shown in •mage 16c.
You can adjust the length of the safety be ts as required.
Care and maintenance
A ways storeyour strol er in a dry and clean place.
Wipe the frame clean using a moist c 0th.
Do not use abrasive or aggressivecleaning products and bleaches.
Removefabric stains using tepid water and gentle soap.
Check the fabric is dry before storing it.
Regular y clean your strol er and lubricate the wheels and axles using light oil.
Do not wash in a washing machine.
Do not dry in a tumble dryer.
Dry in a well-ventilated
Do not bleach!
Do not subject to excessive direct sunlight.
Sunlight may cause discolouration
Do not use accessorieswhich are not recommended by the manufacturer.
After using the stroller in snow or rain,the wheels should be lubricated and the stroller dried
to avoid corrosion.
Regular y clean your strol en
Takemaximum carewhen pushing on uneven surfaces or when pushing onto high kerbs.
Do not overload the strol er with a weight greater than that recommended by the
manufacturer.
f you do not respect the conditions given, this will resut in wheel geometry disturbance,
deformation, bending, breaking or snapping of the stroller frame, damage or destruction of
plastic sockets and assemb y features,or the stroller may turn to one side. nal such cases,
the warranty becomes invalid for repairs.Repairsto fau ts will be charged to the consumer,
including postage costs!
Regularly check:
that all ocks and mechanisms are working correct y
that all screws,nuts and rivets are proper y tightened and intact
that all plastic parts are in ful order and intact
that the brake
room, and never in sunlight.
in materia s.
works
22