STEINEL Spot ONE Bedienungsanleitung Seite 29

13. Troubleshooting
Malfunction
LED light does not switch ON  Fuse has tripped, not
Sensor-switched LED light
does not switch ON
Sensor-switched LED light
does not switch OFF
Sensor-switched LED light
keeps switching ON / OFF
Sensor-LED light switches
ON when it should not
Cause
switched ON, break in
wiring
 Short circuit
 Lamp faulty
 Twilight setting in night-
time mode during dayti-
me operation
 Mains switch OFF
 Fuse has tripped
 Detection zone not cor-
rectly adjusted
 Continued movement
within the detection zone
 Animals moving in detec-
tion zone
 Wind is moving trees and
bushes in the detection
zone
 Cars in the street are
detected
 Sudden temperature
changes due to weather
(wind, rain, snow) or air
expelled from fans, open
windows
 Sensor-switched LED
light is swaying (moving)
due to gusts of wind or
heavy rain
– 29 –
Remedy
 Activate, change fuse,
turn ON mains switch,
check wiring with volta-
ge tester
 Check connections
 Change lamp
 Reset
 Switch ON
 Activate, change fuse,
check connection if
necessary
 Readjust
 Check zone and re-
adjust if necessary or
apply shroud
 Tilt sensor higher; adjust
detection zone
 Change detection zone
 Change detection zone
 Adjust detection zone or
install in a different place
 Mount sensor-switched
LED light on a firm
surface
GB