HOMCOM 824-088V90 Bedienungsanleitung Seite 5

- CHILD Mode
start. The fan will work at high speed for 15 minutes, and it will transfer to medium
speed for 15 minutes, then it will transfer to low speed until it is turned off
automatically. You can turn off oscillation function manually. The LED display will turn
off if you don't control the fan in 30 seconds, touch any button to turn on the display.
5. TIMER : The fan is equipped with a timer that allows you to set its length of
operation from 1 hour to 12 hours. The LED display will turn off if you don't control the
fan in 30 seconds, touch any button to turn on the display.
6. OSCILLATION
function. The symbol is displayed on the LED display.
7. DISPLAY : Can be switched off temporarily by pressing the DISPLAY button on
the remote or by pressing and holding the SPEED button on the control panel for more
than 3 seconds, the display will light up again once any control button is activated.
8. CABLE HOOK: The cable hook is packed in the user manual, take it out and install on
the back side of the fan. The power cord can be hanged at the cable hook when the
fan is not used. (Fig 6)
: Fan will auto. set up timer at 3 hours and oscillation function will
: Pressing the 'OSC' button will start and stop the oscillation
(Fig 6)
5
(Fig 5)