Wilfa INNOVAC XCEED Anleitung Seite 16

EN
Charging failure
Battery liquid
leakage
E1
E2
E3
E5
"Cleaning"
INSTRUCTION MANUAL · INNOVAC XCEED
Ambient temperature
during charging is too
high or too low
The vacuum cleaner has
not been used for a long
time.
Airflow is blocked
Fan fault
Battery pack failure
Circuit board hardware
failure
Nozzle blocked
14
Charge the appliance at the
proper temperature. Make
sure the vacuum cleaner is
not placed in the sunlight if it
is too warm, and make sure
doors and windows are closed
if it is too cold.
Change the battery. Contact
the store to replace the
battery.
Remove obstacle and clean
filter. Contact the store if the
problem still occurs.
Clean the filter. Contact the
store if the problem still
occurs.
Change battery
Contact the store
Remove obstacle