VEVOR XF8308 Bedienungsanleitung Seite 6

1、Assemble the 4pcs 2.5" caster
one by one on the bottom cross
and fasten them with Tube type
nuts ,as shown in the figure.
3、 Place the four tool boxes in Step
2,as shown in the figure.
5、Place the foam-padded seat
onto the small end of the
pneumatic cylinder into the seat
assembly as shown.
INSTRUCTION FOR USE
- 5 -
2、Place the plastic base on the
cross assembled in step 1,as
shown in the figure.
4、Insert the pneumatic cylinder
into the base of Step 3, as shown
in the figure.