HOMCOM 824-022 Bedienungsanleitung Seite 6

1.ON/OFF
Press this ON/OFF button
operation and shows the default wind level 2. Press the button
fan.
2.Mode
The model have three mode: Normal/ Natural/ Sleeping, when you turn on the fan, the
default mode is Normal, the LED screen will indicate
mode, please press
Normal wind mode:
The Normal light indicator
Natural wind mode:
The Natural light indicator
from selected Max wind level to Min wind level mode as cycle mode.
Sleep wind mode:
The Sleep light indicator
selected Max wind level to Min wind level mode as cycle mode. This mode will reduce 1
wind level in every single half an hour. Keep Wind Speed Level 1 until it turns off.
3.Oscillation
Press this button, the fan will oscillate from left to right automatically
5.Timer
Press timer, then Press
cancel the set timer, press the "Timer" button again and press
Hr.
6.Wind Speed
Press to choose the wind speed range from 1-3.
Attention
Before using, please check
whether the voltage is
according to the rating
label.
to turn the fan ON/OFF. Press it once, the fan will start
, and choose the mode you want.
will be switched ON when selected this mode.
will be ON when selected this mode. The fan will run
will be ON when selected this mode. The fan will run from
to choose the duration of time. The timer is 12 hours. To
Before using, please check
the wire and the plug are in
good state. If the wire is
damaged, in order to avoid
unnecessary injure, please
contact or refer to a
technician
again to stop the
, if you want to change the
button to set as 00
Please place the fan in flat
ground.