Samsung SMT-170MP Benutzerhandbuch Seite 14

K. TALK
Communicates with the doorbell in duplex mode.
L. Number Key(0 ~ 9)
K
Press the number of the channel to watch it in full screen
mode.
Or, press the SYSTEM ID button and then press the
number of the system you want to control with the remote
control.
L
M. AUX CONTROL
Outputs relay pulses to an external device for a specified
time.
M
You can adjust this control according to your
environment. (For example, when the doorbell rings, you
can move to the corresponding camera and identify the
visitor before opening the door using the AUX
CONTROL button.)
N. ZOOM(TELE/WIDE)
N
Only the remote control has this button. It is available
only when a camera (SOC-420(P), SOC-920(P) sold
separately) is connected to the system.
O. SET
Enters the selected Sub Menu from the Main Menu.
P. ZOOM
O
When pressed in full screen mode, the screen is enlarged.
Each press of this button enlarges the screen two and four
times sequentially and then returns to the normal size.
P
Use the Rotary Wheel to move the Zoomed-in screen.
Q
Q. FREEZE
R
Captures the selected screen as a still screen.
S
R. SYSTEM ID
Selects the system to control with the remote.
Only the remote control has this button. With system ID button
pressed, enter the desired number by pressing the corresponding
button (0 to 9) to set up the Remote Control ID.
S. ID RESET
Located on the remote control, this button resets the
selected System ID to the default ID (1).
Note: For detailed function, see the MUX Box instruction
provided.
Eng-14