Product Structure; Operating Steps - Autool Pt502 Bedienungsanleitung

Product Structure

Structure Diagram
Power Clamps
A
Pressure Display
C

OPERATING STEPS

Ensure the pressure interface is not connected to any
●
sealed pipeline.
Firmly connect the power clamps to the positive and
●
negative terminals of the backup battery (red clamp to
positive, black clamp to negative) to ensure correct
connection.
Connect the power supply to start the device. Upon
●
startup,
atmospheric pressure calibration. (Note: Do not power
on under pressure, as it will lead to inaccurate measure-
ments.)
Connect the included hose to the device's pressure
●
interface.
Select the appropriate adapter and connect it to the
●
pipeline whose pressure needs to be measured.
A
the device
Pressure Measurement
B
will automatically
5
B
C
Interface
perform