Autool PT502 Bedienungsanleitung Seite 5

Equipment safety rules
Never leave the device unattended while it is powered
on. Always turn off the device at the main switch when it
is not in use for its intended purpose!
Do not attempt to repair the equipment yourself.
Before connecting the device to power, check if the
voltage of the power supply battery matches the rated
parameters. Mismatched voltage may pose serious
hazards and damage the device.
It is essential to protect the equipment from rainwater,
moisture, mechanical damage, overload, and rough
handling.
Application
Before use, check if the battery, connecting hoses, and
adapters are damaged. Do not operate the device if any
damage is found.
Use th e equipment only in compliance with all safety
instructions,
manufacturer specifications.
If repla cing the power battery, use only a brand-new
and unopened product of the correct type.
Personnel protection safety rules
The oil in the corresponding system encountered during
measurement may be harmful to health; any contact
must be avoided.
Alwa ys wear safety goggles when using the equipment
to prevent possible splashing into the eyes. If contact
occurs, rinse with flowing water for several minutes with
eyelids open. If symptoms persist, please consult a
doctor.
Always wear protective gloves while working to avoid
skin contact with the oil. If skin contact occurs, wash
immediately with soap and water. Remove any clothing
or footwear contaminated with oil immediately.
If swall owed, seek medical advice immediately.
Always e nsure you have a stable footing to safely
control equipment in case of emergencies.
technical documents,
3
and vehicle