Cleaning And Care - Renkforce BM-7200 Bedlenungsanleitung

Wireless microphone or pocket
transmitter is not received.

13. Cleaning and care

Under no circumstances use aggressive cleanings agents, cleaning alcohol or other chemical solutions
since these can penetrate the housing or impair functionality.
• Turn off the device to be cleaned and disconnect it from any connected devices and the mains.
• Do not immerse the devices into water.
• Clean the exterior of the device with a soft, dry cloth or brush only.
Batteries are empty.
There is interference or no reception
during wireless transmission. Antennas
are not properly aligned.
There are obstacles (e.g. metal
surfaces, reinforced concrete walls, etc.)
inside the transmission path interfering
with the sound waves.
The range of the system has been
exceeded.
There are interfering sources (radio
devices, computers, strong electronic
engines, etc.) located in the proximity of
the transmitter or receiver station.
Replace the batteries.
Try to readjust the antennas.
Change the location or reduce the
distance between transmitter and
receiver station.
37