troubleshooting
PROBLEM
Motor does not start
Suction force is gradually
decreasing
Cord does not rewind fully
Vacuum cleaner does not
pick up dirt
Low or decreasing suction
Body overheating
Static electicity discharge
This Vacuum cleaner is approved the following.
EMC Directive : 2004/108/EEC
Low Voltage Directive : 2006/95/EC
SOLUTION
• Check cable, pulg and socket.
• Leave to cool.
• Check for blockage and remove.
• Pull the cord out 2-3m and push down the cord rewind button.
• Check hose and replace if required.
• Please check fi lter and, if required, clean as illustrated in the
instructions. if fi lters are out of condition change them to new ones.
• Please check fi lters, If required clean as illustrated in the instruction.
• Please decrease power suction.
Code NO. DJ68-00467M REV(0.0)