Hama Mini Bedienungsanleitung Seite 7

Preparing to pair the devices:
Place the BLUETREK MINI and the mobile phone at adistance of 30 cm (1ft)
from one another.
Switch on the mobile phoneand select Bluetooth discover mode
(see the instructions for your Bluetooth mobile phone).
With the BLIJETREK MINI switched off, pressand hold the TALKbuttonfor
about 7seconds until the indicator lightflashes blue and red alternately
A tone is heard over the speaker
Whenthe mobile phonedetects the headset, a BLUETREK MINI messageappears
on the phone's display. Folow the steps in the instructions of your mobilephoneto
accept the pairing The PIN code (or passkey) for the BLUETREK MINI is 0000.
After entering the PIN, press'Yes" or "0K.
12
Formost phones,you then have to select the 'Connect' function
Once the connection has been established,the indicator light illuminates blue
and beginsto flash slowly. If discover modeis not activated within 5minutes,
anrdnn•n the headset switches Offautomatically.The headset mustbe switched back
on andthe pairing must be reinitiated
Fitting the cord
OZ.g.
Conn W
urauth,riå.ed
13