Hama Mini Bedienungsanleitung Seite 6

@ Operating Instruction
BEFORE OPERATING THIS HEADSET FOR THE FIRST TIME
The device must be chargedfor approx. 4hours, uninterrupted, until the Indicator light goesout
See "Chargingthe BLUETREK MINI" in the instructions
Pair the headsetwith a mobile phone. See •pairing the BLUETREK MINI' in these instructions.
INTRODUCTION
The BLUETREK MINI headset is a wireless headsetfor mobile phoneswith Bluetoothtechnology.
The BLUETREK MINI is a Bluetoothenabled headsetthat fulfils the conditions as required by Bluetooth 1.2
protocol. Two profiles are supported:
Headsetprofile anddevices equipped with the "Hands-free"profile
The BLUETREK MINI headset has 2 buttons:
• 'TALK"button (mainbutton)
'VOL+/ • button
charging socket
Indicator light
10
Chargingthe BLUETREK MINI
Connectthe charger to the headset andthe device When charging, the indicator light flashes red As soon as
the charging process is over, the indicator light goes out. Each subsequentcharging cycle lasts approx.
3 hours.
When you hear a low pitched beep in your headset andthe indicator lightflashes red, the headset must be
recharged
Important:
When the headset isfully charged,the red indicator light does not illuminate when the device is connected
to the charger. ITo check whether the headsetis fully charged, pressthe TALKbutton for approx. 2seconds.
When you release the button,the red indicator light illuminates for approx 3seconds )
The headsetcannot be used while it is charging. To maintain the battery capacity for as long as possible,
we recommend fully charging the headsetonlywhen the battery is ow.This way, the battery can be
maintained for approx 500charging cycles
• Ifthe battery has been dead for a long periodoftime, the battery may be fully discharged. nthis case,
chargethebatteryfor3 hoursormoreuntil t he batteryisfully chargedWhencharging thebatteryaftera
long storage period, it can take several minutes for the indicator light to illuminate red.
• Do not charge the headsetfor longer than 10hours.
TALK button
• Use Ofa different charger voids the warranty TOdo so is expressly prohibited and extremely dangerous
VOL button
Pairing the BLUETREK MINI
Before using the BLUETREK MINI for the first time, you must pair the headsetwith your Bluetooth enabled
mobilephone "Pairing" meanssetting up awireless connection between two Bluetooth enableddevices so
Microphone
thatthese devices can communicate with one another.
11