Operating And Display Elements - Werock Rockscan W100 Betriebsanleitung

Operating and display elements

1 Battery charging slot
Charges a spare battery in parallel with the
barcode scanner
2 Status display of the battery charging
slot
After the base station has been switched on,
insert the battery into the battery charging
slot. The red light on the status display of
the battery charging slot lights up. When the
battery is fully charged, the red indicator will
no longer light up.
3 Device charging slot status indicator
The device charging slot status indicator
lights up red. When the battery is fully
charged, the red light goes out.
4 Device charging slot
To charge the scanner, insert it with the
charging ports facing downwards.
Rockscan W100 User Manual
5 Bluetooth MAC address of the Bluetooth
adapter (BFP1 only)
Switch the device to Bluetooth SPP mode,
scan the Bluetooth MAC address barcode
(either 1D or 2D), and the device and adapter
will activate pairing mode.
6 Bluetooth status display (BFP1 only)
If the base station can be used as a
Bluetooth adapter, the Bluetooth status
indicator flashes blue (pairing mode) when
there is no Bluetooth connection; if the
Bluetooth connection is successful, the blue
indicator is always lit.
7 Data transmission indicator (BFP1 only)
If the base station can be used as a
Bluetooth adapter and the data transfer is
successful, the data transfer indicator lights
up once.
119 / 130