veito CH1200 RT Installation / Benutzerhandbuch Seite 5

EN
This heater must be grounded. Connect to properly grounded outlets only.
Ensure both plug and socket is clean and free from dust when using.
To disconnect the heater from the power supply, grip the plug and pull from the power
socket. Never pull by the cord.
Always plug directly into a wall socket. Never use with an extension cable as overloading
may result in the cable overheating and catching fire.
If there is a loose fit between the plug and the socket or the plug becomes very hot, the
socket may need to be replaced. Check with a qualified electrician to replace the socket.
For installation use only the supplied accessories or original accessories approved by
the manufacturer.
Repair or service must be carried out by a qualified and licenced person only.
If the appliance has not been used, or will not be used for a long period of time,
disconnect the power supply.
Regularly check the heater for damage. Do not use the heater if the heating element
is cracked or broken. If damage to the appliance is suspected, discontinue use
immediately and contact the supplier or qualified person to repair.
Regularly inspect the power cord and plug for wear or damage and do not operate the
heater with a damaged cord, plug or loose socket or after the heater malfunctions,
has been dropped or damaged in any manner.
If the supply cord is damaged, it must be replaced by the manufacturer, it's service
agent or similarly qualified persons in order to avoid a hazard.
Do not remove this Installation & Service Manual or the provided spanners from the
site of installation. Ensure that the manual is stored safely for future reference.
Always leave a clear space of at least 0.5m from the left and right of the unit. The unit
must also have at least 1.5m clear space above it. Never put any obstacles nearer than
1.5m to the front of the unit.
Use the unit in places with easy access to power sockets and that are well ventilated.
Do not use the heater with a programmer, timer or any other device that
switches the heater on automatically.
-5-