Cleaning And Maintenance; Product Disposal - Veito Ch1200 Rt Installation / Benutzerhandbuch

EN

CLEANING AND MAINTENANCE

Always disconnect the heater from the electricity supply and allow adequate time
(minimum of 30 mins.) for it to cool before adjusting the position or attempting to
work on it.
If the heater has collected dust or dirt inside the unit or around the heating element,
have the unit cleaned by a qualified service agent. Do not operate the heater in this
condition.
The only maintenance required is cleaning of the external surfaces of the heater.
Do not use powerful abrasive or solvent cleaning fluids when cleaning the heater. Use
a damp cloth to wipe the outside of the heater.
If removed from its mounting position when not in use, store the heater carefully in a
safe, dry, childproof location.
Do not touch the heating element with bare fingers, as residue from your hand could
affect the life of the lamp. If it is accidentally touched, remove the finger marks with a
soft cloth moistened with methylated spirit or alcohol.
Do not attempt to repair or adjust any electrical or mechanical functions on this heater.
The heater contains no user serviceable parts. Check for damage to the appliance
regularly. If damage to the appliance is suspected, discontinue use immediately and
contact the supplier or qualified person to repair.

PRODUCT DISPOSAL

For the product sold within the European Community. At the end of the electrical
products useful life it should not be disposed of household waste. please recycle where
facilities exist. Check with your Local Authority or retailer for recycling advice in
your country.
-10-