Kiva SILVA R6 Benutzerhandbuch Seite 17

NOTE: with permanent improvement
specifies that all of this manual is not contractually-binding
reserves the right to modify the specifications
without notice
a g Unpackin
1.1
CAUTION:
Incorrect assembly of this machine
injury. Make sure that you follow all the instructions
CAUTION:
Make sure that you do not cut the cables
machine's paintwork when cutting
body
Item
Manuals + parts pouch + bolts pouch
B Log saw
c Fuel funnel
Setting to usage position
Cutting length adjustment
Line up the pin with the notch which corresponds to the
cutting length indicated beside it
UNPACKING
in mind, the manufacturer
of their machines
may cause serious
carefully
or scratch
sharp edges from the
Case content
/ ASSEMBLY
Log support length adjustment
and
Machine identification
the
A — Manufacturer's
B —Type of machine
C — Serial
D —Nominal power
E —Weight in kilograms
F — Machine
G — EC identification
H — Year of manufacture
I —Commercial designation
Description
1- Blade
2- Holding clamp
3- Cutting adjustment pin and transport handle
4- Usage handles
5- Bridge (log support)
6- Engine
7- Bridge extension
8- Belt casing
9- Holder
IO- Circuit
II- Transport handle
12- Blade protection casing
13- Chip removal outlet
Max long length to be cut: 2 metres
plate
name and address
number
model
of the elements
for fuel funnel
breaker
EN