HITWAY BK5 Benutzerhandbuch Seite 5

Folding Operation
1: Unscrew the safety buckle on the
vertical tube folding quick
release,and then loosen the quick
release,the vertical tube can be
folded;
4.Pull outwards quick-release
trigger, then bike frame can be
folded.
Install And Remove Battery Diagram:
I.Turn the key left firstly, then hold
it to push inwards and turn left
continuely.
After this, the lock is opened.
Charging Diagram:
I.The charging port is on the right
side of the battery. Except for the
charging time, please cover the
charging port with a protective
cover.
Diagram:
2: Loosen the seat tube up and
down to adjust the quick
release, adjust the seat tube to
the lowest position;
5: Press the pedal inward with
your hand, and then flip it up to
fold the pedal ;
Press in
2.Afterunlocking, pressand hold
the seat buckle, turn the seat
to the front, pull up the battery
handle to take out the battery.
2.Remove the protective cover,
connect the charger and start
charging.
English
Https://www.LikeSporting.com
Folded state
(3)
3: Loosen the vertical pipe
up and down to adjust the
quick release;
6: Frame folded state.
3.Have the slot on battery pack
aligned with slideway, then put
the battery into frame. It will be
locked after the key being turned
right two times continuously.
3.When charger's indicator turns
from red to green, the battery has
been charged full. Have button
pressed down and hold, the
battery power capacity will be
shown on LCD.